Sony DPP-FP97 - Manual (Page 22)

22 GB
1
From the Edit menu (page 18),
press g/G to select (Adjust) and
then press ENTER.
The Adjust menu is displayed.
2
Press f/F to select the desired
adjustment tool and press ENTER.
The adjustment screen of the selected tool
appears.
Press g/G to adjust an image while
checking the level.
The image before adjustment is displayed
on the left half of the screen, and the
adjusted image is displayed on the right.
• Brightness: Press G to brighten the
picture or g to darken it.
• Tint: Press G to make the picture
greenish or g to make it reddish.
• Saturation: Press G to deepen the
colors or g to lighten them.
• Sharpness: Press G to sharpen the
outlines or g to soften them.
3
Press ENTER.
The adjustment takes effect.
4
Press PRINT.
1
From the Edit menu (page 18),
press g/G to select (Filter) and
then press ENTER.
The Filter menu is displayed.
. 2
Press f/F to select the filter you
want to add to the image.
• No Filter: No special filter is used on
the image (default setting).
• Single Color: Changes all the colors
except for the one specified color into
gray scale.
• Painting: Makes the image look like a
painted picture.
• Cross Filter: Adds a cross, starburst
effect to the light source to print an
image with a sparkling impression.
• Partial Color: Makes the
surroundings of the subject
monochrome to emphasize the subject
in the center.
• Sepia: Changes the image to look like
an old photograph with faded colors.
• Monochrome: Changes the image
into a black and white picture.
Adjusting an image
When “Brightness” is selected.
Adding a special filter to
an image
The “Painting” filter of the printer is uses the
technology of Ichikawa Soft Laboratory.