Sony CFD-G70 - Manual (Page 12)

12
The CD Player
Using the display
You can check information about the CD
using the display.
Checking the remaining time
Press DISPLAY ENT•MEMORY while
playing a CD.
To display Press
DISPLAY ENT•
MEMORY
the current track number once
and remaining time
on the current track*
the number of tracks left twice
and remaining time on the CD
the current track number three times
and playing time
* For a track whose number is more than 20, the
remaining time appears as “– –:– –”.
Total playing
time
Total track
number
DISPLAY ENT
MEMORY
Checking the total track
number and playing time
Press DISPLAY ENT•MEMORY in stop
mode.
Locating a specific
track
You can quickly locate any track on a CD
using the number buttons on the remote.
You can also find a specific point in
a track while playing a CD.
To locate Press
a specific track directly the number button of
the track.
a point while listening to > (forward) or .
the sound
(backward) while
playing and hold down
until you find the point.
a point while observing > (forward) or .
the display (backward) in pause
and hold down until
you find the point.
Note
You cannot locate a specific track if “SHUF” or
“PGM” is lit in the display. Turn off the indication
by pressing x.
Tip
When you locate a track numbered over 10, press
>10 first, then the corresponding number buttons.
Example: To play track number 23, press >10
first, then 2 and 3.
. , >
Number
buttons