Sony SAT-T60 User Manual
Page 22
''
!$: Most people will not need to change the settings the Receiver
uses to dial out. However, if your phone system uses special dialing options, select
“Yes.” See “Change Dialing Options” on page 88 for help with the various settings.
; *
!<3 & The Receiver makes a toll-free call to get a list of local dial-
in numbers. The call usually takes less than five minutes and the status of the call
displays on the screen. If the call fails, check the Troubleshooting section of this guide,
starting on page 97.
!<3 & After the call completes, you’ll see a list of dial-in numbers for your
area code. The list may be too long to fit on one screen. When the highlight bar is at
the bottom of the screen, pressing the DOWN arrow will show more numbers. Use the
UP or DOWN arrow to select the number you want to use to call the TiVo Service.
• If your area code has no access numbers, try a nearby area code. (You can return to
the
5 * screen by pressing LEFT arrow.)
• If you cannot find a number in your local calling area, select “None of the above.”
(You may have to press the CHAN DOWN button to see “None of the above.”)
3%
!3 & If you chose a local dial-in number, you will not see this screen. If
you selected “None of the above” on the
!<3 & screen, select “Request 800
number authorization” here. Selecting this option temporarily selects the toll-free
number and submits a request to use the toll-free number to TiVo Customer Care.
TiVo’s policy is to allow you to use the toll-free number if there are no local numbers
available. TiVo will research available dial-in numbers at your location and send a
message to your Receiver authorizing you to use the toll-free number, or suggesting a
local alternative.
!$)&
Choose the dialing format you need. For example, should the dial-in
number be preceded by your area code and should a “1” precede the area code? In
some areas, even local numbers must be dialed using the area code.
SONY COMBO 2 VG.book Page 11 Friday, December 1, 2000 12:05 PM