Sony SAT-T60 - Manual (Page 25)

'.

                     
   
  
  &%
 ' 
On this tour, you’ll take a look at how you can control live TV.
First, turn on your TV. (You can program the DIRECTV Receiver with TiVo’s remote
control to turn on your TV. For details, see the Installation Guide.)
Press the LIVE TV button on the left side of the remote. This button always takes you
directly to live TV. It also displays a channel banner at the top of the screen, and a
status bar at the bottom of the screen, both of which disappear after a few seconds.
Press the PAUSE button ( ). Wow! The video stops!
Press the BACK button ( ). The program rewinds. Press PLAY ( ), and the
program resumes at normal speed. Just the thing for those irritating little interruptions
that cause you to miss the key moment in your favorite show.
Press the FWD ( ) button—the picture speeds forward. Press it a second time—
faster! A third time—faster still! Both the FWD and the BACK buttons have three
speeds. You can always return to normal speed by pressing PLAY.
Press PAUSE again. Now press FWD. Cool, single frame forward. Press BACK. Cool
again, single frame back. While paused, that’s what FWD and BACK do.
   
Press PAUSE again to bring up the Status Bar. It appears at the bottom of the screen
and shows a one-hour period (notice the time markings at the left and right). The green
part of the bar is the portion of the current hour that has been saved by your Receiver.
The right edge of the green part is always the current time. The white line is the part of
the program you are currently watching. If the white line is anywhere back in the green
part, then you are behind real time (which is better than being “behind the times”).
@ 
   :C 

 3  D     

3      
   
  ( 3 


3 

 
    
D  ( 3 
 
 

     
 



 

    3


   
      

 
  
 
 
 ( 3 

    
( 3 

     
 
 4
 
 ,  
3    
3 
 
    
( 3 
SONY COMBO 2 VG.book Page 14 Friday, December 1, 2000 12:05 PM