Sony SAT-T60 - Manual (Page 94)

6+

+%  
To see 
 , press the TiVo or MENU button, and then select
$ 7
 and then 
 . 
 are your personal preferences—you
change them to make the Receiver work more to your liking.
  
Normally, when you change channels, a Channel Banner displays for a few seconds. If
you want the channel banner to disappear quickly, select “Clear banner quickly.”
5
0 

!
$

!This sets your Receiver’s default to automatically record and output
Dolby Digital audio whenever a program includes it. You should do this if you have
the digital output of your Receiver connected to an audio/visual system equipped with
Dolby Digital decoding. If you are watching a program with Dolby Digital audio, you
will not hear the Receiver’s sound effects. You can change to Dolby Digital audio for
individual programs that include it by selecting the Dolby Digital icon (
) in the
Channel Banner. (See page 35.)
 *
! &Allows you to change the volume or turn off your Receiver’s
sound effects (the tones played when you press buttons on the remote control). The
default setting is Medium. Sounds effects are not currently available from the
Receiver’s digital audio output.
5 *
%
$
$ This sets your Receiver’s default to automatically play the sound
track in the language chosen, if that language is available. If the language you choose
here is not available, the program’s default language is used. When programs include
alternate audio tracks (alternate audio usually provides the sound track in a different
language), you can change the audio track for individual programs by selecting the
Alternate Audio icon (
) in the Channel Banner. (See page 35.)
+    3       
  +*   , 

SONY COMBO 2 VG.book Page 83 Friday, December 1, 2000 12:05 PM