Dvd recording/timer recording/ editing – Sony RDR-VX521 User Manual
The subtitle language cannot be changed or
, Multilingual subtitles are not recorded on the
, The DVD VIDEO prohibits changing of the
, Try changing the subtitle using the DVD
, The subtitles cannot be changed for the titles
recorded on this recorder.
The angles cannot be changed.
, Multi-angles are not recorded on the DVD
VIDEO being played.
, You are trying to change the angles when “
does not appear in the front panel display
, The DVD VIDEO prohibits changing angles.
, Try changing the angle using the DVD VIDEO’s
, The angles cannot be changed for the titles
recorded on this recorder.
The MP3 audio track cannot be played.
, The DATA CD is not recorded in the MP3
format that conforms to ISO9660 Level 1/
, The MP3 audio track does not have the extension
, The data is not formatted in MP3 even though it
has the extension “.MP3.”
, The data is not MPEG1 Audio Layer 3 data.
, The recorder cannot play audio tracks in
, When playing a disc containing JPEG image
files, “Photo” is selected (page 43).
The JPEG image file cannot be played.
, The DATA CD is not recorded in a JPEG format
that conforms to ISO9660 Level 1/Level 2.
, The JPEG image file does not have the extension
“.JPG” or “.JPEG.”
, The data is not formatted in JPEG even though it
has the extension “.JPG” or “JPEG.”
, The length or width of the image is more than
, When playing a disc containing MP3 audio
tracks, “Music” is selected (page 44).
The title of the MP3 audio album/ track or JPEG
image folder/file is not correctly displayed.
, The recorder can only display numbers and
alphabet. Other characters are displayed as
DVD Recording/Timer recording/
The channel cannot be changed from the
channel you are recording.
, Set the TV’s input source to “TV.”
Recording does not start immediately after
REC is pressed.
, Operate the recorder only after “LOAD,”
“FORMAT,” or “INF WRITE” disappears from
the front panel display.
Nothing was recorded even though the timer
setting is set correctly.
, There was a power failure during recording.
, Disconnect the AC power cord from the AC
outlet, and connect it again.
, The program contains copy protection signals
that restrict copying.
, The program that starts first has priority and the
second program starts recording only after the
first program has finished. If the programs start
at the same time, the program listed first in the
menu has priority (page 52).
, There is no DVD inserted in the recorder.
, There is not enough disc space for the recording.
, The cable box/satellite receiver was turned off.
, The set top box controller was incorrectly
connected (page 12).
, The settings in “Set Top Box Control” in
“Features” setup have been changed (page 105).
Recording does not stop immediately after
STOP is pressed.
, It will take a few seconds for the recorder to input
disc data before recording can stop.