Dividing a title into two (divide title), Press title list, Select a title, and press enter – Sony RDR-VX521 User Manual

Page 61: Select “a-b erase,” and press enter, Press enter, Select “ok,” and press enter, Select “divide title,” and press enter

Advertising
background image

61

D

V

D E
d

it

in

g

1

Press TITLE LIST.

When editing a DVD-RW (VR mode) or
DVD-R (VR mode), press ORIGINAL/
PLAYLIST to switch to the “Title List
(Original),” if necessary.

2

Select a title, and press ENTER.

The sub-menu appears.

3

Select “A-B Erase,” and press ENTER.

The display for setting point A and B appears.
“Start” is selected.

4

Press ENTER at the start point of the
section to be erased (point A).

You can use H PLAY, ,
./>, x STOP, and X PAUSE to find
the point. “End” is selected.

5

Press ENTER at the end point of the section
(point B).

“Erase” is selected.
To reset the start or end point, select “Start” or
“End” and repeat from step 4 or 5.

6

Press ENTER.

The display asks for confirmation.

7

Select “OK,” and press ENTER.

The scene is erased.
To continue, repeat from step 4.
To finish, select “Finish,” and press ENTER.

z

Hints

• A chapter mark is inserted after the scene was erased.

The chapter mark divides the title into separate chapters
on either side of the mark.

• You can also erase a section of a Playlist title (page 66).

Notes

• Images or sound may be momentarily interrupted at the

point where you erase a section of a title.

• Sections shorter than five seconds may not be erased.
• The start and end points of a title may be different from

what you have set.

• The total playing time of the title does not change even

if a scene was erased.

• If you erase an original title used in a Playlist, that

Playlist is also erased.

Dividing a title into two (Divide Title)

You can divide a title into two. Note that dividing
original titles cannot be undone.

1

Press TITLE LIST.

When editing a DVD-RW (VR mode) or
DVD-R (VR mode), press ORIGINAL/
PLAYLIST to switch to the “Title List
(Original),” if necessary.

2

Select a title, and press ENTER.

The sub-menu appears.

3

Select “Divide Title,” and press ENTER.

The display for setting the dividing point
appears.
“Point” is selected.

A-B Erase

10:10 AM

Title No.01

End 00:00:00

Start 00:00:00

Start

End

Erase

Finish

00:00:07

T

Title No.01

May/02/2006 08:00 PM

A-B Erase

10:10 AM

Title No.01

End 00:00:00

Start 00:00:10

Start

End

Erase

Finish

00:00:10

T

Title No.01

May/02/2006 08:00 PM

-RW

VR

+

RW

-R

VR

Divide Title (Original)

10:10 AM

Title No.01

T

Point

Divide

00:00:07

Title No. 01

Start 00:00:00

End 00:00:00

May/02/2006 08:00 PM

,continued

Advertising