Sony MDS-JE440 - Manual (Page 39)

39
masterpage:Right filename[\\Win-35\logitecmo\422958711MDSJE640CED\01GB03OPE-CED.fm]
Undoing the last edit
Editin
g Rec
o
rd
ed
MDs
model name1[MDS-JE640] model name2[MDS-JE440]
[4-229-587-11(1)]
Undoing the last edit
(UNDO)
You can undo the last edit operation and restore the
contents of the MD to the condition that existed before the
operation. Note, however, that you cannot undo an edit
operation if you perform any of the following operations
after the edit:
• Start recording.
• Press MUSIC SYNC on the remote.
• Change the recorded level after recording (S.F Edit).
• Turn off the deck or eject the MD.
• Disconnect the AC power cord.
1 While the deck is stopped and no track number
appears in the display, press MENU/NO.
“Edit Menu” appears in the display.
2 Turn AMS (or press . / > repeatedly) until
“Undo ?” appears.
“Undo ?” does not appear if no editing has been done.
3 Press AMS or YES.
One of the following messages appears depending on
the last edit operation.
4 Press AMS or YES.
“Complete!!” appears for a few seconds and the MD is
restored to the condition that existed before the edit
operation.
To restore your edit
Press MENU/NO or x.
Last edit operation Message
Erasing a track
Erase Undo? Erasing all the tracks on an MD
Erasing a portion of a track
Dividing a track Divide Undo?
Combining tracks Combin(e)Undo?
Moving a track Move Undo?
Naming a track or MD
Name Undo?
Copying a track or disc name
Renaming a track or MD
Erasing a track or disc name
Erasing all the names on the MD