Playback, Searching for a desired song, Quick search (cde-9874 only) – Alpine CDE-9872 User Manual

Page 20

Advertising
background image

18

-EN

Playback

1

Press SOURCE/

to switch to the iPod mode.

2

Press

or

to select the desired song.

3

To pause playback, press

/

/ENT.

Pressing

/

/ENT again will resume playback.

A song playing on the iPod while it is connected to this unit will

continue to play from where it was paused after disconnection.

If you listen to an episode from a selected podcast, the episode can be

changed by pressing 1

or

2.

An episode may have several chapters, the chapter can be changed

by pressing

or

.

Searching for a desired Song

An iPod can contain hundreds of songs. By using file tag information
and keeping these songs organized in playlists, this unit’s search
functions will ease song searches.
Each music category has its own individual hierarchy. Use the Playlist/
Artist/Album/Song/Podcast/Genre/Composer search mode to narrow
searches based on the table below.

For example: Searching by Artist name
The following example explains how an ARTIST search is performed.
Another search mode can be used for the same operation, although the
hierarchy differs.

1

Press

/ESC to activate the search selection mode.

2

Turn the Rotary encoder (CDE-9874 only) or press

and

(CDE-9872 only) to select the ARTIST

search mode, and then press

/

/ENT.

PLAYLIST

ARTIST

ALBUM

SONG

PODCAST

GENRE

COMPOSER

PLAYLIST

3

Turn the Rotary encoder (CDE-9874 only) or press

and

(CDE-9872 only) to select the desired

Artist, and then press

/

/ENT.

4

Turn the Rotary encoder (CDE-9874 only) or press

and

(CDE-9872 only) to select the desired

Album, and then press

/

/ENT.

5

Turn the Rotary encoder (CDE-9874 only) or press

and

(CDE-9872 only) to select the desired

Song, and then press

/

/ENT.

After pressing and holding

/

/ENT for at least 2 seconds while

in each hierarchy (except SONG hierarchy), all songs of the selected
hierarchy are played back.

After selecting [ALL] in the search mode with“*”, press and hold

/

/ENT for at least 2 seconds to play back all songs in the iPod

or selected search mode.

While in the search mode, if you press and hold

/ESC for

2 seconds, or no operation is performed for 10 seconds, the search
mode is canceled.

In the search mode, pressing

/MUTE (CDE-9874 only) or

/AUDIO (CDE-9872 only) will return to the previous mode.

Search cannot be made during M.I.X. play.
“NO SONG” will be displayed if there are no songs in the selected

playlist in the PLAYLIST search mode.

“NO PODCAST” will be displayed if there is no podcast data in the

iPod in the PODCAST search mode.

If “iPod name” stored in the iPod is selected in the desired Playlist

search mode, and

/

/ENT is pressed, you can search for all

songs in the iPod. Also, if you press and hold

/

/ENT for at least

2 seconds, all songs in the iPod are played back.

Depending on the iPod, podcast search is not supported.
If any one of the preset buttons (1 through 6) is pressed in the search

mode, a search can be made quickly by skipping to the specified
location. For details, refer to “Direct Search Function” on page 19
.

Quick Search (CDE-9874 only)

You can search a song from all songs in the iPod without selecting an
album, artist, etc.

1

Press and hold

/ESC for at least 2 seconds to

activate the Quick Search mode.

2

Turn the Rotary encoder to select a desired song.

The selected song is played back immediately.

Press and hold

/ESC for at least 2 seconds in the search mode to

cancel. Or, the search mode is canceled if no operation is performed
for 10 seconds.

If many songs are in the iPod, it takes time to search for songs.
If any one of the preset buttons (1 through 6) is pressed in the search

mode, a search can be made quickly by skipping to the specified
location. For details, refer to “Direct Search Function” on page 19
.

This function is inactive during repeat (RPT) playback.

Return to the beginning of the current song:

Press

.

Fast backward through current song:

Press and hold

.

Advance to the beginning of the next song:

Press

.

Fast forward through current song:

Press and hold

.

Hierarchy 1

Hierarchy 2

Hierarchy 3

Hierarchy 4

Playlist

Song

Artist*

Album*

Song

Album*

Song

Song

Podcast

Episode

Genre*

Artist*

Album*

Song

Composer*

Album*

Song

Advertising
This manual is related to the following products: