Sony PEG-TJ27 - Manual (Page 90)

Customizing your CLIÉ™ handheld (Preferences) 90
Sony Personal Entertainment Organizer PEG-TJ37/TJ27 A-BTG-100-11 (1)
Setting the Network preferences for your provider and dial-up server
Setting the telephone information
Define the telephone number you use to connect to your ISP or dial-up server.
In addition, you can also define a prefix, disable Call Waiting, and use a calling
card.
Note
The calling card option works correctly only for AT&T and Sprint long distance services.
If you want to call by MCI, you need to set your telephone information by entering the
calling card number in the field for [Phone #:] and the phone number in the field for [Use
calling card:].
1
Tap next to [Phone:] on the Preferences screen for
[Network].
The Phone Setup screen is displayed.
2
Enter the phone number for your ISP or dial-up server in the
field for [Phone #:].
3
Define the following settings if necessary:
Dial prefix :
Enter the dial prefix (e.g., “9”) to call an outside line.
1 Tap next to [Dial prefix:] to change to .
Enter the dial prefix (e.g., “9,”) in the field next to [Dial prefix:].
Disable call waiting :
When you contract a call-waiting service with your telephone communication
company, you have to interrupt the call-waiting function while accessing the
Internet. Ask your telephone communication company about the code to interrupt
the call-waiting function.
1 Tap next to [Disable call waiting:] to change to .
2 Enter the code to interrupt the call-waiting function (e.g., “1170,”) in
the field next to [Disable call waiting:].
Use calling card :
This option is valid in the USA only.
You can access the Internet using a calling card.
Continued on next page
• • • • • • • • • • • • • • • • • • •
01US01COV.book Page 90 Wednesday, December 3, 2003 10:02 AM