Sony DCR-IP1 - Manual (Page 10)

Quick Start Guide 10
Recording still images on a “Memory
Stick Duo”
1
Attach the charged battery pack to the camcorder.
To charge the battery, see page 13.
2
Insert a “Memory Stick Duo” into the camcorder.
a
Slide the BATT (battery release)
lever in the direction of the arrow as
shown in the illustration and remove
the battery terminal cover.
b
Attach the battery pack with its
terminal side facing your camcorder
as shown in the illustration and press
down the battery pack until it clicks.
Insert it so that the b mark
in the bottom left corner is
facing down. Push it in
until it clicks.
BATT (battery release) lever
b mark