Sony DCR-IP1 - Manual (Page 36)

Recording 36
6
Touch the desired effect.
The still image is superimposed on the
movie which is currently in the standby
mode.
7
Touch (decrease) /
(increase) to adjust the following.
[M T CAM LUMI.]
The color scheme of the bright area in the
still image which is to be swapped into a
movie. When you want to record only the
still image stored on the “Memory Stick
Duo” to a tape, touch
on the
[M TCAM LUMI.] adjustment screen
until the bar indicator is extended fully to
the right side.
[CAM T M CHROMA]
The color scheme of the blue area in the
movie.
[M T CAM CHROMA]
The color scheme of the blue area in the still
image which is to be swapped into a movie.
8
Touch twice.
appears.
9
Start recording.
When you are recording on a tape
Press START/STOP.
When you are recording on a
“Memory Stick Duo”
Press PHOTO fully.
To cancel the MEMORY MIX
Follow steps 3 and 4, then touch [OFF] in step 5.
b Notes
• When the overlapping still image has a large amount
of white, the image in the thumbnail screen may not
be clear.
• When you use MEMORY MIX in the mirror mode
(p. 24), the picture on the LCD screen appears
normally, without being mirror-reversed.
• You may not be able to play back pictures modified
on your computer or recorded with other camcorders
on your camcorder.
z Tip
• The supplied SPVD-010 USB Driver CD-ROM
contains sample images for use in MEMORY MIX
operations. Refer to the supplied “Computer
Applications Guide” for details.
1 0 1
– +
101-0001
0:00:00
M C CAM CHROMA
OK
MEMORY MIX:
STBY 60min