Sony DCR-IP1 - Manual (Page 68)

Using the Menu 68
VIDEO INPUT
When you connect your camcorder to the other device using the supplied A/V
connecting cable, select the plug to be used for video input.
USB-CAMERA
You can connect a USB cable (supplied) to your camcorder, and view the picture
displayed on the screen of your camcorder on your computer (USB Streaming
function). For details, refer to the “Computer Applications Guide.”
USB-PLY/EDT
You can connect a USB cable (supplied) to your camcorder, and view the picture
on the tape or “Memory Stick Duo” in your camcorder on your computer. For
details, refer to the “Computer Applications Guide.”
DATA CODE
REMAINING
G VIDEO Select to input a video signal.
S VIDEO Select to input an S video signals.
G OFF Select to deactivate the USB Streaming function.
USB STREAM Select to activate the USB Streaming function.
G STD-USB Select to view the picture on the “Memory Stick Duo”.
USB STREAM Select to view the picture on the tape.
G OFF Select when you do not want to display date, time and the camera
settings data during playback.
DATE/TIME Select to display date and time during playback (p. 43).
CAMERA DATA Select to display the camera settings data during playback.
G AUTO Select to display the remaining tape indicator for about 8 seconds:
– After the POWER switch is set to the PLAY/EDIT or
CAMERA-TAPE mode with the cassette inserted, and
your camcorder calculates the remaining amount of tape.
– When you touch (play/pause).
ON Select to always display the remaining tape indicator.