Sony DCR-IP1 - Manual (Page 76)

Dubbing/Editing 76
Dubbing to another
tape
You can copy and edit the picture played
back on your camcorder to other recording
devices (such as VCRs).
1
Connect your VCR to your camcorder
as a recording device (p. 75).
2
Prepare your VCR for recording.
• Insert a cassette for recording.
• If your VCR has an input selector, set it to
the input mode.
3
Prepare your camcorder for playback.
• Insert the recorded cassette.
• Slide the POWER switch repeatedly to
select the PLAY/EDIT mode.
4
Start the playback on your camcorder,
and record it on the VCR.
Refer to the operating instructions supplied
with your VCR for details.
5
When the dubbing is finished, stop the
VCR and your camcorder.
b Notes
• When your camcorder is connected to the VCR via
the MICROMV Interface , you cannot record
the title, indicators, information for the micro
Cassette Memory, and words entered on the index
screen of the “Memory Stick Duo.”
• When dubbing using the supplied A/V connecting
cable, press DISPLAY/BATT INFO on your
camcorder to turn off indicators such as the tape
counter on the screen (p. 43). Otherwise, they will be
recorded on the tape.
• When you want to dub with the data code, turn on
the data code such as date on the screen of your
camcorder (p. 43).
• Pictures edited with Picture effect ([PICT.
EFFECT], p. 59), Digital effect (p. 33, 39), or
playback zoom (p. 42) cannot be output via the
the
MICROMV Interface.
• When connected using the i.LINK cable, the
recorded picture becomes rough when a picture is
paused on your camcorder while recording to a
VCR.