Performing the initial settings after, Turning on – Sony PEG-TG50 User Manual
Page 16
16
Step 2: Performing the initial settings after
turning on
The first time you turn on your CLIÉ handheld, you are required to make initial
settings. Follow the on-screen instructions to configure the initial settings and
to get accustomed to operations on your CLIÉ handheld.
1
Slide down the POWER/HOLD switch.
Your CLIÉ handheld turns on, and the
Welcome
screen is displayed.
Tip
If you cannot turn on your CLIÉ handheld
• Did you charge your CLIÉ handheld following the steps on page 13?
b
For details, refer to the supplied manual “Troubleshooting Q&A.”
• If you cannot turn on your CLIÉ handheld even after charging it, perform a soft
reset (page 26).
2
Take out the Stylus.
You can use the stylus to enter
data or to select applications.
Slide down the POWER/HOLD
switch
b
Take out the Stylus