Sony KLV-S19A10 - Manual (Page 5)

3
(US)
US
For customers with
KLV-S23A10
Install the SU-LW1 Wall-Mount Bracket (sold
separately).
Step 1: Check the parts
Open the Wall-Mount Bracket package and check the
contents for all required parts along with the
Instructions.
Step 2: Adjust the position of the
arm bases
This Step (and the corresponding Step described in
the Instructions for SU-LW1) is unnecessary for this
model.
Step 3: Decide the location
Decide where you want to install your TV. Turn to the
back cover of this leaflet for the display installation
dimensions and determine the location.
Refer to the Instructions for the SU-LW1.
Step 4: Install the Plate Unit on
the wall
Refer to the Instructions for the SU-LW1.
Step 5: Remove the Tabletop
stand from the TV
Before removing the Tabletop Stand, disconnect all the
cables from the TV.
Refer to the Instructions for the SU-LW1.
1 Remove the hinge cover, and the
Tabletop Stand from the TV.
To prevent damaging the surface of the LCD
display, place the TV on a soft mat.
Notes
• Lay the display face down on a stable and
level surface with the Tabletop Stand hanging
over the edge of the surface. Having the
display face and the base of the Stand on the
same level surface will create unstable
working condition and can damage the unit.
• Hold the Tabletop Stand firmly while
removing the last screw.
Soft mat
Hinge cover
Tabletop
Stand