Sony DCR-IP1 - Manual (Page 37)

Other functions
Oth
e
r fu
n
cti
o
n
s
37
Connecting an analog
VCR to the computer
via your camcorder
(DV format models
only)
— Digital convert function
* The supplied A/V connecting cable has a video
plug and S video plug. You need to set which plug
to use depending on the equipment to be connected.
For details, refer to the separate Camera Operations
Guide supplied with your camcorder.
You can convert an analog signal output from
an analog device such as a VCR to a digital
signal and transfer it to a digital device, such as
a computer, via your camcorder.
Select [P-MENU], [MENU], [
(STANDARD SET)], [DISPLAY], then [LCD
PANEL] (default setting). For details, refer to
the separate Camera Operations Guide supplied
with your camcorder.
To carry out this operation, you need a software
application (such as ImageMixer Ver.1.5 for
Sony) that can read a video signal installed on
your computer.
ImageMixer Ver.1.5 for Sony is used to
describe the operation in this section.
DV Interface
to i.LINK (IEEE1394)
connector
i.LINK cable (optional)
A/V connecting cable
(supplied)
*
AUDIO/VIDEO
jacks
A/V (audio/video)
jack
: Signal flow
VCR (analog)
(White)
(Red)
(Yellow)
S video
plug (Black)
, continued