Troubleshooting – Sony GV-HD700 User Manual

Page 65

Advertising
background image

65

Tro
ubl
es
hoo

ting

Troubleshooting

Troubleshooting

If you run into any problems using your
VCR, use the following table to
troubleshoot the problem. If the problem
persists, disconnect the power source and
contact your Sony dealer.

Overall operations/Remote Commander

............................................................... 65

Batteries/Power sources ........................ 65
LCD screen............................................66
Cassette tapes/“Memory Stick Duo”..... 66
Playback ................................................ 67
Recording ..............................................68
Connecting to TV .................................. 69
Dubbing/Editing/Connecting to other

devices................................................... 69

Connecting to a computer ..................... 70

The power does not turn on or
abruptly turns off.

• Attach a charged battery pack to the

VCR (p. 12).

• Use the AC Adaptor to connect to a

wall outlet (wall socket) (p. 12).

The VCR does not operate even
when the power is set to on.

• Disconnect the AC Adaptor from the

wall outlet (wall socket) or remove the
battery pack, then reconnect it after
about 1 minute.

• Press the {RESET} button (p. 87) using

a sharp-pointed object.

The VCR gets warm.

• The VCR may get warmer while you

use it. This is not a malfunction.

The Remote Commander does not
function.

• Changing the [REMOTE CTRL]

setting according to the Remote
Commander (p. 63).

• Remove any obstructions between the

Remote Commander and the remote
sensor.

• Keep strong light sources, such as

sunlight or overhead lighting, away
from the remote sensor, otherwise the
Remote Commander may not function
properly.

• Insert fresh batteries in the

compartment with its +/– terminals
matching those of the compartment
(p. 90).

The other VCR malfunctions when
you use the Remote Commander.

• Select a commander mode other than

VTR2 for the VCR.

• Cover the sensor of the other VCR with

black paper.

The POWER/CHARGE lamp does not
light while the battery pack is being
charged.

• Set the POWER switch to OFF (CHG)

(p. 12).

• Attach the battery pack to the VCR

correctly (p. 12).

• Connect the power cord (mains lead) to

the wall outlet (wall socket) properly.

• The battery charge is completed (p. 12).

Overall operations/Remote
Commander

Batteries/Power sources

Continued

,

Advertising