Audiolab 8000M - Manual

a u d i o l a b International Audio Group
IAG house,
Sovereign Court,
Ermine Business Park
Huntingdon, PE29 6XU
The 8000M provides a genuine 125W
power into an 8Ohm loudspeaker load,
and features twin output terminals for
bi-wiring.
It has parallel phono connectors making it
easy to connect several pairs of 8000Ms
to any pre-amplifier. This allows you to
daisy-chain units to further improve
headroom in bi-amped and even
tri-amped systems.
Simple styling belies the power and speed
of response available from this compact
amplifier
S p e c i f i c a t i o n
8 0 0 0 M
Power Amplifier
Rated output power
Typical output power
Input for full rated power
Input impedance
Gain
Signal to noise
Frequency response (-3 dB)
Frequency response (±0.3dB)
Total harmonic distortion + noise
Dimensions (WxHxD - mm)
125 W per channel into rated load impedance (8 Ω ), 200 W into 4 Ω
145 W per channel into rated load impedance (8 Ω ), 240 W into 4 Ω
1.13 V rms
47 k
Ω
nominal
29.0 dB at 1 kHz
Greater than 96 dB (relative to 0 dBW)
0.1 Hz - 75 kHz
20 Hz - 20 kHz
Less than 0.05%
445 x 74 x 337