Alpine IVA-W205 - Manual (Page 25)

23
-EN
01GB05IVA-W205.fm
ALPINE IVA-W205 68-08564Z41-A (EN)
Searching by Title/Group/Program/
Playlist Number
Use this function to easily find positions on the DVD using the DVD’s
titles, groups, programs or playlists.
1
Touch [P1/2]* while playback is stopped.
The function guide appears.
* Touch [P1/3] while playing a DVD-Audio or DVD-VR disc.
2
Touch [10KEY].
The numeric keypad input mode screen appears.
3
Enter a desired title, group, program or playlist by
touching its title, group, program or playlist number.
See page 19 for operation of the numeric keypad.
4
Confirm your selection by touching [ENT].
Playback will start from the title number selected.
• To switch the Program mode display to the Playlist mode display on
the DVD mode main screen, play back via program or playlist
search. Refer to “Searching by Program” or “Searching by Playlist”
(page 20).
• This function cannot be used on discs on which no title numbers are
recorded.
• Playback starts from the beginning of the chapter/track number in the
state of PRE STOP.
• Some disc may not accept any operation.
Searching Directly by Chapter or Track
Number
Use this function to easily move to the beginnings of the chapters or
tracks on the disc.
1
Touch [P1/2]* in any mode other than stop mode.
The function guide will appear.
* Touch [P1/3] while playing a DVD-VR disc or DVD-Audio disc.
2
Touch [10KEY].
The numeric keypad input mode screen will appear.
3
Touch and enter the chapter or track number you
want to play.
See page 19 for operation of the numeric keypad.
4
Touch [ENT] to confirm your selection.
Playback will start from the selected chapter or track.
• This function is not available for a disc on which chapters or tracks
are not stored.
• Be sure to turn PBC off before starting the search. (See “Setting the
Video CD Play Mode” on page 32.)
• For a Video CD disc, a track number can be selected even in the stop
mode.
Switching the Angle
On DVDs in which scenes have been filmed from multiple angles, the
angle can be switched during playback.
1
During playback, touch [P1/2]*.
The function guide changes.
* Touch [P1/3] while playing a DVD-Audio.
2
Touch [ANGLE].
The angle switches between the angles recorded on the
disc every time the button is touched.
• Some time may be required for the angle to change.
• Depending on the disc, the angle may switch in one of two ways.
- Seamless: The angle switches smoothly.
- Non-seamless: When the angle is switched, a still picture is
displayed first, after which the angle switches.
• To play back a DVD-Audio disc, set “VCAP” in “Setting of the DVD-
Audio Playback Mode” (page 32).
Scroll to Move the Page Forward or Back
“Page” is a still image stored on a DVD-Audio disc.
1
Touch [P1/3] twice while playing a DVD-Audio disc
in VCAP mode*.
* To play back a DVD-Audio disc when “VCAP” is set in “Setting of
the DVD-Audio Playback Mode” (page 32).
2
Touch PAGE [ ] or [ ].
The display switches.
Touch and hold to display the home page.
• For DVD-Audio discs without Pages, depending on the DVD-Audio
disc, the “Page” function may not be operable if images are in slide
show form.
Switching the Audio Tracks
DVDs with multiplex audio or audio languages allow switching the
sound during playback.
1
During playback, touch [P1/2]* 1 .
* 1 The display differs according to the disc (mode).
2
Touch [AUDIO].
The sound switches between the alternate audio tracks
recorded on the disc every time the button is touched.
• The alternate track selected becomes the default setting every time
the power is turned on or the disc is replaced. If the disc does not
include that track, the disc’s default language is selected instead.
• Not all discs will allow changing the alternate audio tracks during
playback. In these cases, select audio tracks from the DVDs menu.
• There may be a delay before the selected alternate track begins to
play.
01GB00IVA-W205.book Page 23 Wednesday, January 24, 2007 5:11 PM