Visual eq, Visual eq setting operation – Alpine IVA-W205 User Manual

Page 41

Advertising
background image

39

-EN

01GB06IVA-W205.fm

ALPINE IVA-W205 68-08564Z41-A (EN)

Visual EQ Setting Operation

1

After steps 1 and 2 in “Display Setup Operation”
(page 37) have been performed, touch [

] of

VISUAL EQ.

VISUAL EQ screen appears.

2

Select a desired setting item by touching [

] or [

].

Setting items:

VISUAL EQ*

BRIGHT

COLOR*

TINT*

CONTRAST

SHARP*

USER

MEMORY*

* The setting is available in the visual source mode (except navigation

screen).

3

Change the setting on the selected item by touching
its [

] or [

].

4

Touch [RETURN] to return to the previous screen.

Touch and hold [RETURN] for at least 2 seconds to return to
the main source screen that was displayed before the setup
operation was started.

You can select a mode suitable for the subject image.

Setting item: VISUAL EQ
Setting contents: OFF (FLAT) / NIGHT M. / SOFT / SHARP /
CONTRAST / P-1 / P-2

To return to the initial setting after selecting any one of the setting

contents (NIGHT M. to CONTRAST) and adjusting a desired
brightness, picture tint, etc., set this function to OFF.

If your desired brightness, picture tint, etc., are adjusted after

selecting any one of the setting contents (NIGHT M. to CONTRAST),
“CUSTOM” is displayed.

Setting item: BRIGHT
Setting content: -15 ~ +15

You can adjust the brightness between MIN (–15) and MAX
(+15). When it reaches the minimum or maximum point, the
display shows “MIN” or “MAX” respectively.

When any Visual EQ Preset is selected, the brightness is

automatically adjusted according to the car’s interior lighting as
long as AUTO is set in “Setting the Brightness of the Backlighting”
(page 38).

Setting item: COLOR
Setting content: -15 ~ +15

You can adjust the color between MIN (–15) and MAX (+15).
When it reaches the minimum or maximum point, the display
shows “MIN” or “MAX” respectively.

Color adjustment can be made only in the navigation, DVD, Video

CD, AUX modes.

Color adjustment cannot be made if a Navigation system with the

RGB feature is connected.

Setting item: TINT
Setting content: G15 ~ R15

Adjust the color from G15 to R15. “G MAX” or “R MAX” is
displayed at the maximum of each color.

Tint adjustment can be made only in the navigation, DVD, Video CD,

AUX modes.

Tint adjustment cannot be made if a Navigation system with the RGB

feature is connected.

Setting item: CONTRAST
Setting content: -15 to +15

Contrast adjustment range is -15 to +15. “LOW” and “HIGH”
appear as the minimum and maximum values specified.

VISUAL EQ™

The following steps 1 to 4 are common operations to each
“Setting item” of VISUAL EQ setting. Refer to each section for
details.

Selecting the VISUAL EQ Mode (Maker’s
setting)

OFF (FLAT): Initial Setting

NIGHT M.:

Suitable for movies in which dark scenes
frequently appear.

SOFT:

Suitable for CGs and animated films.

SHARP:

Suitable for old movies where images are not
clearly shown.

CONTRAST: Suitable for recent movies.

P-1:

Recalls the VISUAL EQ mode being stored on
preset No.P-1 from “Storing VISUAL EQ”
(page 40).

P-2:

Recalls the VISUAL EQ mode being saved on
preset No.P-2 from “Storing VISUAL EQ”
(page 40).

Adjusting Brightness

Adjusting Color of Picture

Adjusting Tint of Picture

Adjusting Image Contrast

01GB00IVA-W205.book Page 39 Wednesday, January 24, 2007 5:11 PM

Advertising