Sony DSC-H1 - Manual (Page 30)

30
• If you select certain shutter speeds*, the NR slow shutter function activates automatically to reduce the
picture noise and “NR” appears.
* When [ISO] is [400]: 1/25 second or slower
When [ISO] is not [400]: 1/6 second or slower
• If you select slow shutter speeds, it takes time to process the data.
• If the proper exposure is not obtained after making the settings, the setting value indicators on the screen
flashes when the shutter button is pressed halfway down. You can shoot in this condition, but we
recommend that you adjust the flashing values again.
• The flash is set to (Forced flash) or (No flash).
• When the shutter speed is high, the amount of flash light may be insufficient even if you fire the flash.
To adjust the aperture value (Aperture priority)
1 Set the mode dial to A.
2 Select an aperture value using the jog dial (page 26).
– When the zoom is set fully to the W side, you can select an aperture from F2.8 to F8.0.
– When the zoom is set fully to the T side, you can select an aperture from F3.7 to F8.0.
3 Shoot the image.
• The shutter speed is automatically adjusted from 1/1000 to 8 seconds. When you set an aperture value of
F5.6 or more, the values start from 1/2000 second.
• If the proper exposure is not obtained after making the settings, the setting value indicators on the screen
flashes when the shutter button is pressed halfway down. You can shoot in this condition, but we
recommend that you adjust the flashing values again.
• The flash is set to (Forced flash), (Slow synchro) or (No flash).
To adjust the shutter speed and the aperture value (Manual exposure)
1 Set the mode dial to M.
2 Select a shutter speed using the jog dial (page 26).
3 Select an aperture value using the jog dial (page 26).
The difference between the settings and proper exposure judged by the camera appears as an EV value
(page 31) on the screen. 0EV indicates the value judged as the most suitable by the camera.
4 Shoot the image.
• The camera maintains the setting even when the power is turned off. Once you set a value you like, you
can reproduce the same exposure by simply setting the mode dial to M.
• If the proper exposure is not obtained after making the settings, the setting value indicators on the screen
flashes when the shutter button is pressed halfway down. You can shoot in this condition, but we
recommend that you adjust the flashing values again.
• The flash is set to (Forced flash) or (No flash).
SL