Sony DSC-H1 - Manual (Page 92)

92
• The print setting of the camera differs from that of the printer. Change the setting of either the
camera (page 78) or the printer.
Cannot operate the camera after canceling printing.
• Wait for a while as the printer is carrying out the cancellation. It may take some time
depending on the printer.
Your camera does not work.
• Use the type of batteries you can use with this camera (page 98).
• The battery level is low (The E indicator appears). Charge the batteries ( t step 1 in “Read
This First”).
The power is on, but the camera does not work.
• The built-in microcomputer is not working properly. Remove the batteries, and then, after one
minute, insert the batteries and turn on the camera.
Cannot identify an indicator on the screen.
• See page 18.
The lens gets fogged.
• Moisture condensation has occurred. Turn off the camera and leave it for about an hour before
using it (page 100).
The camera becomes warm when you use it for a long time.
• This is not a malfunction.
The lens does not move when you turn off the camera.
• The batteries are discharged. Replace them with charged batteries ( t step 1 in “Read This
First”) or use the AC Adaptor (not supplied).
The Clock Set screen appears when you turn on the camera.
• Set the date and time again ( t step 2 in “Read This First”).
Others