Sony KDL-52VE5 - Manual (Page 19)

19
Usi
ng th
e M
e
nu
s
Navigating Music Control Panel
Use V/v/B/b from the remote control to
navigate music during play.
Energy Saving Switch
Turning off the
Energy Saving
Switch can save
stand by power
consumption.
It has the same
effect as
disconnecting TV’s
power AC cord from the wall outlet.
To turn on the TV again, make sure the
Energy Saving Switch is on (
z
) position,
then press POWER button on the TV set or on
the remote control.
Presence Sensor
Presence Sensor effectively reduces power
consumption by automatically turning off the
picture when no one is present in the vicinity
of the TV set (see online Reference Book for
more details about this feature).
Sensor Range and Detection Angle
The Presence Sensor is capable of
detecting vertical and horizontal movements. It
may not detect forward/backward movements
to/from the TV set. Large movements are
easier to detect, even of someone in a relatively
far distance.
The sensitivity of the sensor can vary
substantially depending on ambient light and
temperature in the room.
*The given sensor range and detection angle
are measured under typical room conditions.
• The TOOLS Menu selections may vary.
ENERGY SAVING SWITCH
• If Energy Saving Switch is turned
off, the Timer settings and the
Current Time will be cleared.
• If Energy Saving Switch is turned
off, the TV power button or remote
control power button can not work and
the TV will not be turned on.
• To make the TV be standby condition,
keep the Energy Saving Switch on (
z
)
position, you will be able to use TV or
remote power button to turn on the TV.
Approx. 9.8 ft.
Approx. 30°
Approx. 9.8 ft.
Approx. 80°
Presence Sensor
Typical coverage
Horizontal Vertical
• The sensor is active while watching
broadcast programs, DVD movies, video
games and tapes. It is not active during
functional views such as displaying
menus and the TV guide.
• The sensor is disabled for inputs from
computers.
• Do not put anything near the sensor or
the nearby general area (shown above),
as its function may be affected.
• The sensor may respond to heat from
small animals and heating devices, as it
picks up body heat.
• The sensor may trigger picture off when
the viewer stays still for the given
amount of time.
• Do not scratch or apply excessive force
to the sensor surface, as it may damage
the sensor and its function may be
affected.