Sony KDL-32XBR950 - Manual (Page 48)

46
Setup
DVD Player with
S VIDEO and Audio
Connectors Use this connection if your DVD player does not have component video (Y,
P
B
, P
R
) jacks.
To connect a DVD player with A/V connectors
1 Use an S VIDEO cable to connect the DVD player’s S VIDEO jack to
the TV’s S VIDEO input jack (VIDEO 1 or 3).
2
Use an audio cable to connect the DVD player’s audio output jacks to
the TV’s VIDEO 1 or 3 audio input jacks.
Notes on Using This Connection
To Do This ... Do This ...
Watch the DVD player Press TV/VIDEO repeatedly to select the DVD input (VIDEO 1 in the illustration).
Set up the remote control to
operate the DVD player If you have a non-Sony DVD player, you must program the remote control. See
“Programming the Remote Control” on page 60.
Activate the remote control to
operate the DVD player Press FUNCTION repeatedly until the DVD/VCR indicator lights up.
Control DVD functions with the
remote control See “Operating a DVD Player” on page 64.
Label video inputs to easily
identify equipment connected to
the TV See the instructions for setting up Video Labels on page 116.
S VIDEO
VIDEO
Y
P B
P R
L
R
L
AUDIO
R
AUDIO
VIDEO IN 3
4
1
HD/DV
(1080i/720p/
Rear of Media Receiver Unit
DVD Player
Audio cable
S VIDEO
cable