Sony HDR-CX500V - Manual (Page 65)


Table of C
on
ten
ts
U
seful R
ec
or
ding
Techniques
Inde
x
The [USB SELECT] screen appears on
the camcorder screen.
If the [USB SELECT] screen does not
appear, touch (MENU) 
 [USB CONNECT] (under
[OTHERS] category).
 Touch [ USB CONNECT] when
movies are recorded on the
internal memory, or [
USB
CONNECT] when movies are
recorded on “Memory Stick PRO
Duo” media on the camcorder
screen.
 Record movies on the connected
device.
For details, refer to the instruction
manuals supplied with the device to be
connected.
 After the operation is completed,
touch [END]  [YES] on the
camcorder screen.
 Disconnect the USB cable.
Notes
The high definition image quality (HD) disc
that you created should not be used in DVD




players/recorders. Because DVD players/
recorders are not compatible with the AVCHD
format, DVD players/recorders may fail to eject
the disc.
Creating a standard definition
image quality (SD) disc with a
recorder, etc., other than DVDirect
Express
You can dub images played back on your
camcorder on a disc or video cassette,
by connecting your camcorder to a disc
recorder, a Sony DVD writer, etc. with
the A/V connecting cable. Connect the
device in either way of  or . Refer
also to the instruction manuals supplied
with the devices to be connected. Select the
recording media that contains movies you
want to dub and the image quality before
starting the operation (p. 67, 77).
Sony DVD writer may not be available in some
countries/regions.
Notes
Connect your camcorder to the wall outlet (wall
socket) using the supplied AC Adaptor for this
operation (p. 20).
High definition image quality (HD) movies
will be dubbed with standard definition image
quality (SD).
 A/V connecting cable (supplied)
Connect the A/V connecting cable to the
input jack of another device.
 A/V connecting cable with S VIDEO
(sold separately)
When connecting to another device
via the S VIDEO jack, by using an A/V
connecting cable with an S VIDEO cable
(sold separately), higher quality images can
be produced than with an A/V connecting
cable. Connect the white and red plug
(left/right audio) and the S VIDEO plug
(S VIDEO channel) of the A/V connecting
cable with an S VIDEO cable. If you
connect the S VIDEO plug only, you will
hear no sound. The yellow plug (video)
connection is not necessary.



