Sony VGF-HS1 User Manual

Store share, Ports, Unpacking getting to know your vgf-hs1 home server

Advertising
background image

© 2008 Sony Corporation / Printed in Japan

4-121-976-01(1)

❑ Home Server

❑ Rear cover

❑ AC adapter

❑ Power cord

❑ Network (LAN) cable (straight-

through Ethernet cable, 2 m)

❑ User Guide

❑ Setup Guide

❑ Quick Start Guide

(this document)

❑ Warranty sheet or Guarantee

and Service Support booklet
(depending on the country or
region of residency)

❑ CD-ROM disc

• Software

– PC Link

– VAIO Media

• Contents

Sample contents
(also stored on your Home
Server at the time of delivery)

1 COPY indicator light

Indicates the state of a USB device
or a memory card and the status of
data imported from the device or
card.

2 NETSERVER indicator light

Indicates the server test status or
the state of the Home Server.

3 1 (POWER) indicator light

Indicates the state of the power
supply or the state of the Home
Server.

4 1 (POWER) button

Press this button to turn on and off
the Home Server.

5 INFO indicator light

Indicates the state of the Home
Server.

6 HDD indicator light

Indicates the remaining capacity or
the state of the hard disk drive.

7 CONNECT button

Press this button to obtain a
permission code for adding a Data
Sync (receiving) profile.

8 COPY button

Press this button to import data
from a USB device or a memory
card.

9 SD (SD memory card) slot

Insert an SD memory card.

q;

(USB) port

Connect a USB mass storage
class device, such as a digital still
camera or a digital camcorder.
This port is also labeled as Front
USB on the Home Server Settings
Page.

qa Display

Displays information on the Home
Server.

qs DISPLAY button

Press this button to turn on the
display on the Home Server and
select the required information.

qd Memory Stick slot

Insert a “Memory Stick” media.
This slot can also accommodate
the Duo-type media without an
adapter.

qf OK button

Press this button to confirm the
information displayed on the
display.

qg CANCEL button

Press this button to cancel the on-
going operation. You can also
press and hold this button for 10
seconds to clear the administrator
registration and the IP address
settings.

qh MEMORY CARD access indicator

light
Blinks while access to the memory
card is in progress.

qj CF (CompactFlash) slot

qk CF (CompactFlash) media eject

button

ql Front door

To open the front door, put your
fingertip on the left end of the door
and slide it half way to the right. To
close the door, slide it half way to
the left.

w; ID label

Shows the model name of the
Home Server.

1 Air vents

2 DC IN port

Connect to the AC adapter.

3 Network (LAN) port

Connect a network (LAN) cable.

Note

Be sure not to connect any
unsupported networks or any
telephone lines to the Network
port.

Ports

Front

Back

4

(USB) port 1

Connect a USB mass storage
class device, such as a digital still
camera or a digital camcorder.
This port is also labeled as Rear
USB1 on the Home Server Settings
Page.

Unpacking

Getting to know your VGF-HS1 Home Server

The information provided here is designed to help you become familiar with your Home Server.

Note

Some of the above products may not be available, depending on the country or region of residency.

5

(USB) port 2

Connect a USB mass storage
class device, such as a digital still
camera or a digital camcorder.
This port is also labeled as Rear
USB2 on the Home Server Settings
Page.

VGF-HS1 Series

Store

Share

Advertising
This manual is related to the following products: