Sony XDP-PK1000 User Manual

Page 17

Advertising
background image

17

2

Press the arm down gently and set your
iPod/iPhone in the cradle.
Press the iPod/iPhone backward until it
touches to the cushion in the center of
the cradle (

), and hold the iPod/

iPhone securely while pressing the arm
down (

).

Note

• Make sure that there is no gap between the

iPod/iPhone and the arm when setting the
iPod/iPhone in the cradle.

Tips

• The system plays back music from the iPod/

iPhone when the iPod/iPhone is in the play
mode as you set it on the cradle.

• An iPod/iPhone is charged when set in the

cradle, and the system is turned on.

To adjust the angle of the cradle

You can adjust the angle of the cradle as
shown in the illustration below. Do not use
force to adjust the angle, as a malfunction may
result.

To remove the iPod/iPhone from the
cradle

1

Press the PUSH RELEASE button to stretch
the arm of the cradle (

).

2

Remove the iPod/iPhone, following the
same angle as the connector on the cradle
(

).

Notes

• If you remove the iPod/iPhone from the cradle

when it is in the play mode, the iPod/iPhone
stays selected as the source.

Gap

Advertising