The system components, Dsp master unit – Sony XDP-PK1000 User Manual

Page 5

Advertising
background image

5

The System Components

This section contains explanations on the location of controls and their basic operations.

DSP master unit

Sound setting switches page 10

Set each switch according to your car
type/interior.

SOURCE indicator

You can check the status of the DSP
master unit.

INPUT SELECT switch

Select either 2-channel or 4-channel
sound from the car audio unit. Select
“2ch” if you connect only the front car
speakers to the DSP master unit, with
High Level Input connection.

RESET

Press to reset the DSP master unit
settings.

Note

• Avoid touching the top of the DSP master unit

during use, as it becomes hot over time.

2 3 4

1

Indicator

Status

Turns blue.

A car audio unit is selected as
the source.

Turns red.

An iPod/iPhone is selected as
the source.

Flashes blue.

Diagnostic error. See
“Troubleshooting” (page 22).

Flashes red.

Overload error when an
iPod/iPhone is selected as the
source. See
“Troubleshooting” (page 22).

Flashes blue
and red
alternately.

Temperature detection is
working. See
“Troubleshooting” (page 22).

Advertising