Sony DCC-NWC1 User Manual

Car connecting cable, Dcc-nwc1, Features

Advertising
background image

© 2007 Sony Corporation Printed in China

DCC-NWC1

3-197-285-11(1)

Car Connecting
Cable

Operating Instructions

Mode d’emploi

Manual de instrucciones

English

The following FCC statement applies only to the version of this model
manufactured for sale in the USA. Other versions may not comply with
FCC technical regulations.
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
You are cautioned that any changes or modifications not expressly
approved in this manual could void your authority to operate this
equipment.

Disposal of Old Electrical & Electronic Equipment (Applicable
in the European Union and other European countries with
separate collection systems)

This symbol on the product or on its packaging indicates
that this product shall not be treated as household waste.
Instead it shall be handed over to the applicable collection
point for the recycling of electrical and electronic
equipment. By ensuring this product is disposed of
correctly, you will help prevent potential negative
consequences for the environment and human health,
which could otherwise be caused by inappropriate waste

handling of this product. The recycling of materials will help to conserve
natural resources. For more detailed information about recycling of this
product, please contact your local Civic Office, your household waste
disposal service or the shop where you purchased the product.

Notice for the customer in the countries applying EU Directives
The manufacturer of this product is Sony Corporation, 1-7-1 Konan,
Minato-ku, Tokyo, Japan.
The Authorized Representative for EMC and product safety is Sony
Deutschland GmbH, Hedelfinger Strasse 61, 70327 Stuttgart, Germany.
For any service or guarantee matters please refer to the addresses given in
separate service or guarantee documents.

The validity of the CE marking is restricted to only those
countries where it is legally enforced, mainly in the countries
EEA (European Economic Area).

For customers in the USA
Use “LIMITED WARRANTY” card warranted by Sony Electronics Inc.

For customers in Canada
Use “Consumer 1 Year Warranty” card warranted by Sony of Canada Ltd.

Features

Supports WM-PORT (22 pin) equipped Walkman

Available for recharging the Walkman

*

in a car

This unit takes power supply from the cigarette lighter socket, and supplies
it to Walkman.
* Walkman operation while charging varies depending on the Walkman.

AUDIO OUT jack equipped

This unit outputs the audio signal to other car audio devices, such as car FM
transmitter, car cassette audio adaptor, car audio unit’s AUX IN, etc. so that
you can enjoy listening to the sound from connected Walkman in a car.

Equipped with audio output level switch

Output level from the AUDIO OUT jack can be switched to HIGH or LOW.

Note

Connects to a 12 V DC car battery (only for negative # grounded cars) only.
This unit cannot be connected to a 24 V DC car battery.

How to Use

Be sure to use this unit with the engine of the car running. If this unit is left
plugged into the cigarette lighter socket when the engine is not running,
power may be consumed from the car battery.

Notes

• Ensure that this unit is safely installed so as not to interfere with the

operation of the accelerator or gears.

• Never perform connection and operation while your car is in motion.
• For details about the connected device, refer to the operating instructions

supplied with each device.

Install the unit
1

Connect the WM-PORT connector to the WM-PORT of
your Walkman. (See fig. A.)

2

Insert this unit into the cigarette lighter socket. (See fig. B.)

The indicator lights up.
If this unit is not inserted fully, the indicator does not light up.

Note

If there is any obstructions around the cigarette lighter socket, rotate this
unit to avoid them when installed.

Listening to sound played on the Walkman

By connecting a peripheral device to the AUDIO OUT jack of this unit
using an optional audio cable, you can listen to the sound played on the
Walkman through the car audio unit.

Peripheral devices:
FM Transmitter for Car Radio, car audio cassette adaptor, car audio
unit equipped with auxiliary input, etc.

1

Connect a peripheral device to the AUDIO OUT jack of this
unit using an optional audio cable. (See fig. C.)

For details on connection, refer to the operating instructions supplied
with the device.

2

Operate the OUTPUT LEVEL switch according to the
connected device.

• Car audio unit equipped with AUX input: HIGH
• Other devices: LOW

3

Start playing on the Walkman.

Note

While connected to this unit, you cannot adjust the volume on the
Walkman. Adjust the volume on the car audio unit.

Charge your Walkman

Walkman operation while charging varies depending on the Walkman.

1

Set the Walkman to recharge.

It may not be necessary to set the Walkman to recharge. (See
Walkman’s Operation Guide.)

2

When charging is finished, disconnect the Walkman from
this unit.

Notes

• Plug securely into the cigarette lighter socket.
• This unit may not fit, depending on the location or shape of the cigarette

lighter socket.

• Be careful to route all the cables properly so that:

– they will not interfere with your driving.
– they will be out of the reach of children.

• Install this unit in a manner that will not hinder the airbag function in an

emergency.

• Do not use the device in a place subject to liquid or moisture to avoid fire

or electric shock.

• Do not place this unit or the Walkman in a location where it is subject to

extreme high temperature. It mat result in damage.

While not using this unit

To avoid unnecessary car battery consumption, unplug this unit from the
cigarette lighter socket when not in use.

When you turn the car engine off

Unplug this unit from the cigarette lighter socket whenever the engine of
the car is not running. Depending on the car type, even if the engine is off,
the power supply may not turn off automatically. In this case, this may
cause unnecessary car battery consumption.

Fuse Replacement

If this unit does not work correctly (if the indicator does not light up),
check the fuse in the cigarette lighter plug.
If the fuse is blown, replace it. (See fig. D.)

1

Pull this unit out of the cigarette lighter socket.

2

Detach the end of the plug by turning it counter-clockwise.

3

Take out the fuse.

4

Check the fuse.

If the fuse is blown, go to Step 5.
If no fuse is blown, go to Step 6.

5

Install a new fuse.

Use a fuse of the correct amperage, as stated on the fuse compartment
of this unit (1 A, 125 V, 20 mm).

6

Insert the fuse.

7

Reattach the end of the plug by turning it clockwise firmly.

Notes

• Use of a higher amperage fuse may cause serious damage or fire.
• Do not use a piece of wire instead of a fuse.
• If the replaced fuse blows again, consult your dealer.

Precautions

On safety
• Do not connect or operate this unit, a car audio unit, or a portable device

while driving or waiting at a traffic signal. Park in a safe place first.

• Unplug this unit from the cigarette lighter socket whenever the engine of

the car is not running. Depending on the car type, even if the ignition key
is off, the power supply may not turn off automatically. In this case, this
may cause unnecessary car battery consumption.

• When not in use, unplug this unit from the cigarette lighter socket and

store in a safe place where it will not interfere with your driving or
become entangled in parts of the car interior (seat, door, etc.). To
disconnect the unit, grasp the unit and pull it. Never pull the cord
connected to the unit.

• Should any liquid or solid object fall into the unit, disconnect the unit

from the cigarette lighter socket and the equipment and have the unit
checked by qualified personnel before operating it any further.

Installation
• Do not place this unit in a location where it is:

– subject to extreme high temperature.
– subject to direct sunlight or near a heat source.
– subject to mechanical vibration or shock.
– subject to excessive dust.

• Be sure to fully secure the connected device connected to the unit to

avoid moving when braking.

Operation
• Never yank or pull the cables. This may cause malfunctions or wire

breaks.

• To prevent damage, be careful not to drop or hit the unit. This may cause

a mechanical shock or malfunctions to the unit.

• This unit may become warm while using. This is not a malfunction.
• After using, disconnect the unit from the cigarette lighter socket and the

equipment.

On charging
• Make sure the current and voltage of the Walkman rechargeable device

match the outlet.

• For safety, if the input current is too high, the unit will automatically shut

down.

• To avoid short-circuiting, do not allow the terminals of the unit or

connector to touch any metal object.

• Note that data stored in the Walkman connected to this unit may be lost

or damaged if the engine is started or stopped with this unit inserted into
the cigarette lighter socket.

Troubleshooting

Should any problem persist after you have made the following checks,
consult your nearest Sony dealer.

There is no sound from the Walkman to the car audio unit.
❒ The indicator does not light up.
❒ This unit is not fully plugged into the cigarette lighter socket.

c Insert this unit correctly and securely.

❒ There is no sound from the connecting Walkman.

c Start playback on the Walkman.
c Set the volume control of the car audio unit as high as possible but

not so high that the audio signal becomes distorted.

The volume is low.
❒ The volume of the Walkman is too low.

c Set the volume control of the car audio unit as high as possible but

not so high that the audio signal becomes distorted.

❒ The OUTPUT LEVEL switch of this unit is set to LOW.

c Set the OUTPUT LEVEL switch to HIGH.

The sound is distorted.
❒ The OUTPUT LEVEL switch of this unit is set to HIGH.

c Set the OUTPUT LEVEL switch to LOW.

The indicator of this unit does not light up.
❒ This unit is not completely plugged into the cigarette lighter socket.

c Insert this unit correctly and securely.

❒ Depending on the car type, the engine must be started for electric

current to flow to the cigarette lighter socket.
c Start the engine.

❒ The fuse is blown.

c Replace the fuse.

Specifications

Power voltage

DC 12 V (only for negative # grounded cars)

Rated output voltage

DC 5.0 V (WM-PORT)

Maximum output current

800 mA (WM-PORT)

Audio output

AUDIO OUT: ø3.5 mm (stereo mini plug)

OUTPUT LEVEL

Switchable between HIGH/LOW

Dimensions

(Approx.)

Cable length

Approx.1.5 m (4.9 ft)

Mass

Approx. 40 g (1.42 oz) (without cable)

Design and specifications are subject to change without notice.

“WALKMAN” and “WALKMAN” logo are registered trademarks of Sony
Corporation.

A

D

C

B

OUTPUT LEVEL

AUDIO OUT

LOW

HIGH

1

2

4

3

OUTPUT LEVEL

AUDIO OUT

LOW

HIGH

WALKMAN

Peripheral
devices
Périphériques

1

OUTPUT LEVEL
switch

2

AUDIO OUT jack

3

WM-PORT
connector

4

Indicator

Fuse
Fusible

Cigarette lighter plug
Allume-cigare

End of the plug
Extrémité de la
fiche

to tighten
pour serrer

to remove
pour le retirer

Insert this unit securely so that the indicator lights up.
Insérez cet appareil correctement de manière à ce que
le témoin s’allume.

Unit: mm

101

21

34

96

Français

Traitement des appareils électriques et électroniques en fin de
vie (Applicable dans les pays de l’Union Européenne et aux
autres pays européens disposant de systèmes de collecte
sélective)

Ce symbole, apposé sur le produit ou sur son emballage,
indique que ce produit ne doit pas être traité avec les
déchets ménagers. Il doit être remis à un point de collecte
approprié pour le recyclage des équipements électriques et
électroniques. En s’assurant que ce produit est bien mis au
rebut de manière appropriée, vous aiderez à prévenir les
conséquences négatives potentielles pour l’environnement
et la santé humaine. Le recyclage des matériaux aidera à

préserver les ressources naturelles. Pour toute information supplémentaire
au sujet du recyclage de ce produit, vous pouvez contacter votre
municipalité, votre déchetterie ou le magasin où vous avez acheté le
produit.

Avis à l’attention des clients des pays appliquant les directives
UE
Le fabricant de ce produit est Sony Corporation, 1-7-1 Konan, Minato-ku,
Tokyo, Japon.
Son représentant autorisé concernant la CEM et la sécurité du produit est
Sony Deutschland GmbH Hedelfinger Strasse 61, 70327 Stuttgart,
Allemagne.
Veuillez vous référer aux adresses indiquées dans les documents
d’entretien ou de garantie séparés concernant toute question relative à
l’entretien et à la garantie.

La validité de la marque CE est limitée aux pays où elle est
légalement en application, notamment dans les pays de
l’EEE (Espace économique européen).

Pour les clients aux Etats-Unis
Utilisez la carte de garantie limitée fournie par Sony Electronics Inc.

Pour les clients au Canada
Utilisez la carte de garantie de 1 an fournie par Sony of Canada Ltd.

Caractéristiques

Prise en charge des Walkmans dotés d’un WM-PORT
(22 broches)

Possibilité de recharger le Walkman* dans une voiture

Cet appareil se branche sur l’allume-cigare et alimente le Walkman.
* Le fonctionnement du Walkman en cours de charge varie en fonction du

Walkman.

Doté d’une prise AUDIO OUT

Cet appareil émet le signal audio vers les autres périphériques audio de la
voiture comme un émetteur FM de voiture, un adaptateur d’autoradio
cassette, la prise AUX IN de l’autoradio, etc. de sorte à ce que le son soit
émis par le Walkman raccordé à la voiture.

Doté d’un commutateur du niveau de sortie audio

Le niveau de sortie de la prise AUDIO OUT peut être commuté sur HIGH
ou LOW.

Remarque

Se raccorde uniquement à une batterie de voiture 12 V CC (uniquement
pour les voitures avec mise à la masse négative #).
Cet appareil ne peut pas être raccordé à une batterie de voiture 24 V CC.

Utilisation

Veillez à utiliser cet appareil pendant que le moteur du véhicule tourne. Si
cet appareil reste connecté à l’allume-cigare alors que le moteur du
véhicule est coupé, la batterie du véhicule risque de se décharger.

Remarques

• Assurez-vous que cet appareil est correctement installé pour ne pas gêner

le fonctionnement de l’accélérateur ou du levier de vitesses.

• N’effectuez jamais de raccordements ni de manipulations pendant que

votre voiture roule.

• Pour plus de détails sur le périphérique raccordé, reportez-vous au mode

d’emploi fourni avec chaque périphérique.

Installez l’appareil
1

Raccordez le connecteur WM-PORT au WM-PORT de
votre Walkman. (Voir fig. A)

2

Insérez cet appareil dans l’allume-cigare. (Voir fig. B)

Le témoin s’allume.
Si cet appareil n’est pas inséré correctement, le témoin ne s’allume
pas.

Remarque

S’il y a des obstacles autour de l’allume-cigare, pivotez cet appareil afin de
les éviter lorsqu’il est installé.

Ecoute des données audio lues sur le
Walkman

En raccordant un périphérique à la prise AUDIO OUT de cet appareil à
l’aide d’un câble audio en option, vous pouvez écouter les données audio
lues sur le Walkman via l’autoradio.

Périphériques :
Emetteur FM pour autoradio, adaptateur d’autoradio cassette,
autoradio doté d’une entré auxiliaire, etc.

1

Raccordez un périphérique à la prise AUDIO OUT de cet
appareil à l’aide d’un câble audio en option. (Voir fig. C)

Pour plus d’informations sur le raccordement, reportez-vous au mode
d’emploi fourni avec le périphérique.

2

Réglez le commutateur OUTPUT LEVEL en fonction du
périphérique raccordé.

• Autoradio doté d’une entrée AUX : HIGH
• Autres périphériques : LOW

3

Lancez la lecture sur le Walkman.

Remarque

Vous ne pouvez pas régler le son sur le Walkman lorsqu’il est raccordé à
cet appareil. Réglez le volume sur l’autoradio.

Charge du Walkman

Le fonctionnement du Walkman en cours de charge dépend du Walkman.

1

Mettez le Walkman à recharger.

Toutefois, ceci peut s’avérer inutile. (Reportez-vous au Mode
d’emploi du Walkman.)

2

Lorsque la charge est terminée, débranchez le Walkman de
cet appareil.

Remarques

• Veillez à brancher cet appareil correctement dans l’allume-cigare.
• Il est possible que cet appareil ne puisse pas être inséré, selon la position

ou la forme de l’allume-cigare.

• Veillez à acheminer les câbles correctement de sorte que :

– ils ne gênent pas la conduite ;
– ils soient hors de portée des enfants.

• Installez l’appareil de sorte qu’il n’entrave pas le fonctionnement de

l’airbag en cas d’urgence.

• N’utilisez pas l’appareil dans un endroit soumis à des projections liquides

ou à l’humidité afin d’éviter tout risque d’incendie ou d’électrocution.

• N’installez pas cet appareil ou le Walkman dans un endroit exposé à de

très hautes températures. Cela risquerait de les endommager.

Lorsque vous n’utilisez pas cet appareil

Pour éviter toute consommation d’énergie inutile, débranchez cet appareil
de l’allume-cigare quand vous ne l’utilisez pas.

Lorsque vous coupez le moteur du véhicule

Débranchez cet appareil de l’allume-cigare dès que le moteur du véhicule
est coupé. Selon le type de véhicule, l’alimentation n’est pas coupée
automatiquement même si le moteur est coupé. Dans ce cas, ceci peut
entraîner une consommation inutile de la batterie du véhicule.

Suite de l’autre côté

1

Commutateur
OUTPUT LEVEL

2

Prise AUDIO OUT

3

Connecteur
WM-PORT

4

Témoin

Advertising