About add-on card installation – Sony PCV-RZ40C User Manual

Page 37

Advertising
background image

About Add-on Card Installation

Your computer may have one or more open expansion slots, depending on the model configuration. An expansion slot
enables you to install add-on cards to expand the functionality of your system. The length of the add-on card should not
exceed 9.05 inches.

Add-on card configuration varies by model. Some models, such as Configure-to-Order (CTO) systems, may contain

preinstalled add-on cards.

Observe the proper safety precautions when you add cards to your Sony computer. See

Before upgrading your

computer

.

Installing an add-on card

1.

Shut down your computer and turn off all peripheral devices, such as your printer.

2.

Unplug your computer and any peripheral devices.

3.

Remove the side panel. See

Removing the side panel

.

4.

Locate an available expansion slot. Remove the slot cover's screw, and then remove the slot cover.

When removing a slot cover, be careful not to damage components on the system board or add-on

cards. You may need to temporarily remove add-on cards or other components that may be next to the slot cover
you want to remove.

Rem ov ing the slot cov er

5.

Install the add-on card by inserting it into the expansion slot and secure it with the screw from the expansion
slot cover.

Installing an add- on card

Page 37

Advertising
This manual is related to the following products: