Sony DSC-TX5 User Manual

Page 132

Advertising
background image

Ta
ble
of

co
nte
n

ts

Op
e

rat

io

n

S

ear

ch

MENU/Settin

g

s

Se
ar

ch

In

de
x

132

GB

The image is out of focus.

• The subject is too close. When shooting, make sure to position the lens farther away from the subject

than the shortest shooting distance (approximately 1 cm (13/32 inches) (W)/50 cm (1 ft 7 3/4 inches)
(T) from the lens in Intelligent Auto Adjustment and Easy Mode, or approximately 8 cm (3 1/4
inches) (W)/50 cm (1 ft 7 3/4 inches) (T) from the lens in other recording modes). Or set to Close
focus mode and shoot about 1 cm to 20 cm (13/32 inches to 7 7/8 inches) from the W side distance.

(Landscape) mode or (Twilight) mode or (Fireworks) mode is selected in the Scene Selection

when shooting still images.

Zoom does not work.

• You cannot use the zoom during Intelligent Sweep Panorama shooting.
• You cannot use the Smart zoom depending on the image size (page 90).
• You cannot use the Digital Zoom in the following situations:

– In Movie Mode
– In Backlight Correction HDR mode
– When the Smile Shutter function is activated.

Cannot select the Face Detection function.

• You can select Face Detection only when the focus mode is set to [Multi AF] and the Metering Mode

is set to [Multi].

• You cannot select Face Detection when the Close focus mode is activated.

The flash does not work.

• You cannot use the flash in the following situations:

– Shooting burst images (page 52).
– When

(High Sensitivity) mode, (Twilight) mode or (Fireworks) mode is selected in the

Scene Selection.

– In Intelligent Sweep Panorama mode
– In Movie Mode
– In Anti Motion Blur mode
– In Hand-held Twilight mode

• Set the flash to [On] (page 44) in the following situations:

– In Backlight Correction HDR mode
– In Close focus mode
– When

(Landscape), (Gourmet),

(Pet),

(Beach), (Snow),

(Underwater) or (Hi-

Speed Shutter) is selected in the Scene Selection.

Fuzzy white circular spots appear in images shot using the flash.

• Foreign particles (dust, pollen, mist, etc.) in the air or suspended particles in water reflected the flash

light and appeared in the image. This is not a malfunction.

Advertising