Symptoms and solutions, My clié handheld is not working properly, I cannot turn on my clié handheld – Sony PEG-NZ90 User Manual
Page 13: My clié handheld is not responding
13
My CLIÉ handhel
d
is
not working pr
operly
Symptoms and Solutions
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
My CLIÉ handheld is not working
properly
I cannot turn on my CLIÉ handheld
B The HOLD switch of your CLIÉ handheld is on.
Your CLIÉ handheld does not operate when the HOLD switch is on.
Make sure you turn it off.
B The battery of your CLIÉ handheld has run out.
Place your CLIÉ handheld in the cradle connected to the AC adapter, then
charge it for a few minutes before turning it on. If it turns on, continue
charging it for approximately four hours and then perform a soft reset.
B The connector between your CLIÉ handheld and the cradle is dirty.
You cannot recharge your CLIÉ handheld if the connector is dirty. Try
re-installing your CLIÉ handheld several times in the cradle to clean the
connector.
I cannot see anything on the screen although the LED is on
B The HOLD switch of your CLIÉ handheld is on.
The screen is not displayed when the HOLD switch is on.
B Perform a soft reset by pressing the reset button.
b
For details, refer to “Basic operations of your Sony CLIÉ™ handheld: Restarting
your Sony CLIÉ handheld” in the “Read This First (Operating Instructions).”
My CLIÉ handheld is not responding
B The HOLD switch of your CLIÉ handheld is on.
Your CLIÉ handheld does not operate when the HOLD switch is on.
Make sure you turn it off.
Continued on next page
• • • • • • • • • • • • • • • • • • • • • • • • •