Sony SAT-T60 - Manual (Page 15)

15 Parts, Controls, and Functions
Ge
tting S
ta
rte
d
Installing Batteries
Before you can use the Remote Control, you must insert the supplied batteries.
If you want to use this Remote Control to operate other audio/video
equipment, such as a TV or stereo, you must program the Remote Control (see
page 27).
1 Pull the latch and lift the cover to open the battery
compartment.
2 Insert two size AA batteries (supplied).
Be sure to match the + and – marks on the batteries with the + and –
marks inside the battery compartment.
3 Close the cover.
Insert the tabs on the cover into the gaps in the rear of the battery
compartment. Then, lower the cover onto the Remote Control until you
hear the latch click.
Notes
• When the batteries become weak, the Remote
Active indicator flashes. If the Remote
Control does not work properly, the batteries
may be weak.
• When replacing batteries, replace both
batteries with new ones. Do not mix different
types of batteries together.