2. back panel of the directv, Hd receiver – Sony SAT-HD300 User Manual

Page 21

Advertising
background image

20

3-2. Back Panel of the DIRECTV

®

HD Receiver

(1080i/720p/480p)

(1080i/720p/480p)

RGB OUT

DATA PORT

DVI-HDTV OUT

SATELLITE

IN

TYPE

CABLE IN

ANT IN

OUT TO TV

Y

COMPONENT OUT

(1080ii/720p/480p/480ii)

Pr

1

L2

R2

R1

L1

2

AUDIO OUT

Pb

OPTICAL

DIGITAL

AUDIO

OUT

S VIDEO

OUT

VCR

CONTROL

RF

REMOTE

(1080ii/720p/480p/480ii)

PHONE

JACK

VIDEO OUT

Ant In

Is used to connect an over-the-air or terrestrial antenna.

Cable In

Is used to connect a coaxial cable coming from your cable TV service outlet or cable box.

Out to TV

Provides an RF connection between the DIRECTV HD Receiver and older TVs. All decoded signals are

provided on channel 3 or 4 as selected in the Output Channel section of the Setup menu. When the

DIRECTV HD Receiver is in the standby mode, Cable or Antenna signals are passed through as chosen

in the Out to TV section of the Setup menu.

Video Out 1, 2

Is used to provide baseband composite video signal to a VCR or TV set. Video connection generally

provides picture quality that is superior to RF connections. For a better quality picture connection, use

the S-Video jack if it is available.

Component Out

Is used to connect to a Y/Pb/Pr-compatible monitor. Three video and two audio jacks for a Y/Pb/Pr

monitor need to be connected and the TYPE switch must be set to left position.

RGB/DVI-HDTV Out

Is used to connect to either an RGB compatible or DVI-HDTV monitor. Either an RGB port for an RGB

monitor or a DVI-HDTV port for a DVI-HDTV monitor need to be connected and the TYPE switch must

be set to right position.

Note : The DVI-HDTV port has a higher priority when both the RGB and DVI-HDTV ports are connected.

Note: For best access to High-Definition Programming from DIRECTV, connect the DVI-HDTV output to

a DVI-HDTV input on your high-definition TV or monitor. A DVI-HDTV input is one that is compliant

with EIA-861 and HDCP specifications. Check your TV or monitor’s user manual to find out if the TV or

monitor’s DVI input is compliant with these specifications.

Advertising