Sony SAT-HD300 - Manual (Page 58)

57
7. ADVANCED PROGRAM GUIDE™
7-6. Setting a Timer/Record Event for Future Viewing
If you want to view a program scheduled in the future, you can put that program on the Timer/Record
List so that program will be automatically tuned.
A timer event will automatically tune to the selected channel at the selected time. A Record event will
also turn on the DIRECTV ® HD Receiver if it is turned off and will automatically control your VCR to
record the program if the VCR Controller is correctly set up (see sections 3-6 and 8-23).
Timer/Record Events may also be manually set through the menu (see section 8-5).
To schedule a future viewing :
1. Move the highlight to a future program you want to watch using “ DEF G ” on the remote control.
2. Press the “ ” button on the remote control to display the available additional information.
3. Pressing “ F ” will move the highlight to the “Timer” menu, located on the left side of the additional
information box, and press “ ”.
4. A dialog box will appear for your review.
5. Move the highlight to the “OK” option in the dialog box and press “ ” to confirm.
6. The program name will be preceded by the Timer mark. If you want to cancel any reservation, execute
the menu sequence MENU ➝ DIRECTV ➝ Timer/Record List and press “ ” when the highlight is
on the reservation.
NOTE
A reminder message will appear at the bottom
of the screen 10 seconds before the reserved
program actually starts. The receiver will
automatically tune to the program if you do not
cancel it.
Pay per view programs can only be purchased
within 24 hours of the program times.