Sony STR-DE898 - Manual (Page 41)

Oth
e
r Operatio
ns
masterpage:Right
lename[D:\Sony
SEM\Data_DE898_Revision3\J9050152_2580791113DE898U\2580791113\GB070TH_STR-
DE898-U.fm]
41 GB
model name1[STR-DE898]
[2-580-791-11(3)]
You can enter a name of up to 8 characters for
preset stations and inputs selected with INPUT
SELECTOR, and display it in the receiver’s
display.
1
To index a preset station
Turn INPUT SELECTOR to select the
FM or AM band, then tune in the preset
station you want to create an index
name for (page 26).
To index an input
Turn INPUT SELECTOR to select the
input you want to create an index name
for.
2
Press MAIN MENU repeatedly to select
“
CUSTOMIZE ”.
3
Press or repeatedly to select
“NAME IN”.
4
Press ENTER.
The cursor flashes and you can select a
character.
5
Use or and –/+ to create an index
name.
Turn –/+ to select a character, then press >
to move the cursor to the next position.
Tips
• You can select the character type as follows by
turning –/+.
Alphabet (upper case)
t Numbers t Symbols
• To enter a blank space, turn –/+ until a blank
space appears in the display.
• If you made a mistake, press < or > repeatedly
until the character you want to change flashes,
then turn –/+ to select the correct character.
6
Press ENTER to store the index name.
You can set the receiver to turn off automatically
at a specified time. Use the remote for the
operation.
1
Press ALT to light up the button.
2
Press SLEEP while the power is on.
Each time you press SLEEP, the display
changes cyclically as follows:
2-00-00 t 1-30-00 t 1-00-00 t
0-30-00 t OFF
While using Sleep Timer, “SLEEP” lights up in
the display.
Tip
To check the remaining time before the receiver turns
off, press ALT to light up the button (page 46), then
press SLEEP. The remaining time appears in the
display. If you press SLEEP again, the sleep timer will
be canceled.
Other Operations
Naming preset stations
and inputs
Using the Sleep Timer
GB01COV_STR-DE898-U.book Page 41 Tuesday, March 15, 2005 12:20 PM