Sony STR-DE898 - Manual (Page 53)

Op
era
tio
ns
Us
in
g
the
Re
mote
RM-AAL
00
1
masterpage:Right
lename[D:\Sony
SEM\Data_DE898_Revision3\J9050152_2580791113DE898U\2580791113\GB08REM_STR-
DE898-U.fm]
53 GB
model name1[STR-DE898]
[2-580-791-11(3)]
To control a hard disc recorder
To control a blu-ray disc recorder
To control a PSX
By using the Learning function, it is possible for
this remote to perform learned commands.
Setting remote control codes
that are not stored in the remote
When a remote control code is not one of the
presets stored in the remote, it is possible for the
remote to learn the code using the Learning
function.
1
Press TV ?/1 while holding down
RM SET UP.
The indicator lights up.
2
Press the input button (including TV
?/1 ) for the component you want to
control.
For example, if you are going to learn an
operation for a CD player, press SA-CD/
CD.
3
Press the button you want to use for
the Learning function.
The indicator turns off while a valid button
is pressed, then flashes slowly.
4
Point the remote control code receiver
section of the remote towards the
receiver/transmitter on the remote
control to be learned.
Maker Code(s)
SONY 307, 308, 309
Maker Code(s)
SONY 310, 311, 312
Maker Code(s)
SONY 313, 314, 315
Learning the commands of
your components
H
X
m
M
.
>
-
x
P
L
O
f F
G
g
5–10 cm
continued
GB01COV_STR-DE898-U.book Page 53 Tuesday, March 15, 2005 12:20 PM