Sony WG-C10 User Manual

Quick start guide, Usb connection, Portable wireless server

Advertising
background image

4-454-824-

B2 (1)

Portable Wireless Server

Quick Start Guide

WG-C10 Series

For Computer users

Thank you for your purchase. Read this Quick Start Guide when
using this unit with a computer.
When using with a smartphone or tablet, refer to the Quick Start
Guide supplied with this unit or download “Quick Start Guide for
Smartphone or Tablet users” from the following web site.
http://www.sony.net/pws/

Identifying the Parts

Wireless LAN indicator
lamp

Battery indicator lamp

(power) button

Strap holder

RESET (reset) switch

Memory card slot

Memory card access lamp

USB A port
For charging a smartphone or
tablet
For connecting to a USB memory
or digital still camera

USB micro B port
For charging this unit
For connecting to a computer

MAC address

Serial number

The MAC address and serial number shown
on the label on the bottom of this unit may be
needed for various settings. Write them down in
the below space.

Lamp Indicator of this Unit

Battery indicator lamp

Charging indicator

Lamp condition

Status

Amber

Charging underway

Amber

 off

Charging is complete

Remaining battery level indicator in use

Lamp condition

Status

Green, blinking slowly

Battery level is high

Green, blinking

Battery level is medium

Red, blinking rapidly

Battery level is low

Off

Battery runs out or power-off

Wireless LAN indicator lamp

Lamp condition

Status

Green

Wireless LAN is starting up

Green, blinking

Wireless LAN is on

Off

Power-off

Memory card access lamp

Lamp condition

Status

Amber, blinking

Accessing memory card

Step1: Charging this Unit

This unit has a built-in rechargeable battery pack.
Charge this unit before use.

Charge this unit from a computer or with a USB AC adaptor (sold
separately).

When charging from a computer

Connect this unit to your computer with the USB cable (supplied).

Battery indicator

lamp (amber)

During charging: On

Charging complete:

Off

USB cable (supplied)

Approximate charging time: Approx. 8 hours

Charging underway:

• Wireless LAN function cannot be used.

When charging with a USB AC adaptor (sold separately)*

Connect the USB cable (supplied) to this unit and the USB AC
adaptor (sold separately), and connect the USB AC adaptor to the
wall outlet (wall socket).

* A USB AC adaptor is not supplied with this unit.

For more information about USB AC adaptors that have been
confirmed to work with this unit, see the Help Guide (http://rd1.
sony.net/help/pws/c10/gb/).

Approximate charging time: Approx. 3.5 hours
(When using AC-UD10)

Approximate charging time varies depending on the USB AC
adaptor (sold separately) used.

Charging underway:

• Can read and write data to a memory card via a wireless LAN.

• USB devices connected to this unit cannot be used.

When charging is complete, the battery indicator lamp turns off.
When charging is complete, remove the USB cable.

Windows

USB Connection

Step2: Connect this unit to a computer

1 Insert a memory card into the card slot of

this unit.

2 Connect this unit to a computer with the

supplied USB cable.

Be careful of the orientation of the cable.

USB cable (supplied)

3 Open [Computer] (or [My Computer] in

Windows XP) on the computer.

4 Confirm the newly recognized “Removable

disk (E:)*” icon on the screen.

You can now access the folders and files in the memory card.

* The drive name may differ from “(E:)”, depending on your

computer.

Note

• Other USB devices cannot be used with this unit when it is

connected to a computer by USB.

Disconnecting the USB cable

1 Confirm that access to this unit is finished.
2 Click

,

or

(Removing the hardware)

icon on the task tray at the bottom right of
the screen.

The device currently connected to the computer is displayed.

3 Click this unit.
4 Confirm the message “Safe to Remove

Hardware” and click [OK].

If using Windows 8, Windows 7 or Windows XP, you do not
need to click [OK].

5 Disconnect the USB cable from the computer.

Mac

USB Connection

Step2: Connect this unit to a computer

1 Insert a memory card into the card slot of

this unit.

2 Connect this unit to a computer with the

supplied USB cable.

Be careful of the orientation of the cable.

USB cable (supplied)

Click [File]

 [New Finder Window].

Connection is completed when the name of your memory card
is displayed in [Device].

• The disk icon is not displayed when no memory card is

inserted into this unit.

You can now access the folders and files in the memory card.

Note

• Other USB devices cannot be used with this unit when it is

connected to a computer by USB.

Disconnecting the USB cable

1 Confirm that access to this unit is finished.
2 Drag and drop the disk icon of this unit to

the Trash icon. Or click (Eject) of this unit’s
drive on the Finder.

3 Disconnect this unit from the USB terminal.

© 2013 Sony Corporation

Advertising