Step 6: preparing the remote, Controlling tvs with the remote – Sony BDP-S5000ES User Manual

Page 28

Advertising
background image

28

Step 6: Preparing the
Remote

You can control the player using the supplied
remote. Insert two Size AA (R6) batteries by
matching the 3 and # ends on the batteries
to the markings inside the battery
compartment. When using the remote, point
it at the remote sensor

on the player

(page 10).

b

• Use the batteries correctly to avoid possible

leakage and corrosion. Should leakage occur, do
not touch the liquid with bare hands. Observe the
following:
– Do not use a new battery with an old battery, or

batteries of different manufacturers.

– Do not attempt to recharge the batteries.
– If you do not intend to use the remote for an

extended period of time, remove the batteries.

– If battery leakage occurs, wipe out any liquid

inside the battery compartment, and insert new
batteries.

• Do not expose the remote sensor (marked

on

the front panel) to strong light, such as direct
sunlight or a lighting apparatus. The player may
not respond to the remote.

You can control the volume, input source,
channel, and power switch of your Sony TV
with the supplied remote.

b

When you replace the batteries of the remote, the
code number may be reset to the default setting. Set
the appropriate code number again.

Available buttons

Depending on the connected unit, you may
not be able to control your TV with some or
all of the buttons (TV [/1, CH +/–, VOL +/–,
MUTING, or number buttons).

Controlling TVs with the
remote

Buttons

Operations

TV [/1

Turns your TV on or off.

VOL (volume) +/– Adjusts the volume of

your TV.

CH (channel) +/–

Selects the channel on
your TV.

INPUT (input
select)

Switches your TV’s
input source between the
TV and other input
sources.

MUTING

Mutes the sound.

VOL +/–

Number
buttons

INPUT

TV [/1

MUTING

CH +/–

Advertising