Sony STRDH830 User Manual

Page 77

Advertising
background image

77

GB

D:\NORM'S JOB\SONY HA\SO130042\STR-DH830_DH730_PMRF
03\4408151122_GB\GB07ADD_STR-DH730-CEL.fm

masterpage: Right

STR-DH830/STR-DH730

4-408-151-12(2)

Ad
ditional Inf

o

rmation

There is no sound from a specific
equipment.

• Check that the equipment is connected

correctly to the audio input jacks for that
equipment.

• Check that the cord(s) used for the

connection is (are) fully inserted into the
jacks on both the receiver and the
equipment.

• Check the INPUT MODE (page 59).
• Check that the equipment is connected

correctly to the HDMI jack for that
equipment.

• You cannot listen to the Super Audio CD

by connecting HDMI.

• Depending on the playback equipment,

you may need to set up the HDMI setting
of the equipment. Refer to the operating
instructions supplied with each
equipment.

• Be sure to use a High Speed HDMI cable

when you view images or listen to sound,
especially for the 1080p, Deep Color
(Deep Colour) or 3D transmission.

• Sound may not be output from the receiver

while the GUI appears on the TV screen.
Press GUI MODE to select “GUI OFF”.

• Audio signals (format, sampling

frequency, bit length, etc.) transmitted
from an HDMI jack may be suppressed by
the connected equipment. Check the setup
of the connected equipment if the image is
poor or the sound does not come out of the
equipment connected via the HDMI cable.

• When the connected equipment is not

compatible with copyright protection
technology (HDCP), the image and/or the
sound from the HDMI TV OUT jack may
be distorted or may not be output. If this is
the case, check the specification of the
connected equipment.

• Set the image resolution of the playback

equipment to more than 720p/1080i to
enjoy High Bitrate Audio (DTS-HD
Master Audio, Dolby TrueHD).

• The image resolution of the playback

equipment may need to be at certain
settings before you can enjoy Multi
Channel Linear PCM. Refer to the
operating instructions of the playback
equipment.

• Make sure the TV is compatible with the

System Audio Control function.

• If the TV does not have System Audio

Control function, set the “Audio Out”
settings in HDMI Settings menu to
– “TV+AMP” if you want to listen to the

sound from the TV speaker and
receiver.

– “AMP” if you want to listen to the

sound from the receiver.

• When you connect the receiver to a video

equipment (projector, etc.), sound may not
be output from the receiver. In this case,
set the “Audio Out” to “AMP” in the
HDMI Settings menu (page 67).

• If you cannot listen to the sound of the

equipment connected to the receiver while
TV input is selected on the receiver
– Be sure to change the input of the

receiver to HDMI when you want to
watch a program on the equipment
connected via HDMI connection to the
receiver.

– Change the TV channel when you want

to watch a TV broadcast.

– Be sure to select the correct equipment

or input you want when you watch a
program from the equipment connected
to the TV. Refer to the operating
instructions of the TV on this operation.

• Check that the “A. DIRECT” is not being

used.

• When using the Control for HDMI

function, you cannot control the connected
equipment using TV’s remote control.
– Depending on the connected equipment

and TV, you may need to set up the
equipment and TV. Refer to the
operating instructions supplied with
each equipment and TV.

– Change the input of the receiver to the

HDMI input connected to the
equipment.

continued

Advertising