Sony ICD-MS1 - Manual (Page 11)

11
Getting Started
Step 3: Inserting a
“Memory Stick“
into the IC Recorder
Insert a “Memory Stick“ into the Memory
Stick slot in the direction of b on the
“Memory Stick“ as shown below.
Notes
• Make sure to insert the “Memory Stick“ firmly.
• Do not insert a “Memory Stick“ in a different
direction. It may cause malfunction of the unit.
After inserting a “Memory Stick“
The following display will appear. If you
insert a “Memory Stick“ for the first time after
purchasing or one with no data, three folders
(FOLDER01, FOLDER02, FOLDER03) will be
made in the “Memory Stick“ automatically.
Note
The unit is accessing while “ACCESS“ appears in
the display window or the OPR indicator flashes in
orange. While accessing, do not remove the
“Memory Stick“, batteries, or the AC adaptor. Doing
so may damage the data.
The b mark
facing up
ACCESS
E M MORY S ICK T
About write-protect of a “Memory
Stick“
You cannot record or erase data when the
write-protect switch on the “Memory Stick” is
set to “LOCK“.
Removing the “Memory
Stick“
Slide the EJECT lever in the direction of the
arrow and remove the “Memory Stick“ from
the slot as shown below.
Write-protect switch
EJECT lever