Sony ICD-MS1 - Manual (Page 22)

22
To mark an index during recording
While recording a message, press INDEX
button at the point you want to divide.
The new message number is added at the
point you pressed INDEX button, and “ADD
INDEX“ flashes three times. The message will
be divided in two messages; however, the
messages will be recorded without a break.
1 Tip
You can add an index during recording pause (page 13).
To add an index during playback
While playing back a message, press INDEX
button at the point you want to divide.
The message is divided in two and “ADD
INDEX“ flashes three times.
An index mark is added and the following
index numbers will increase by one.
1 Tip
You can add an index after you have paused
playback with X(pause) button (page 16).
To play the message you marked
with an index
Press the jog lever up or down to display the
message number as the divided messages
each have message numbers.
Dividing a Message
into Two / Combining
Messages — Index
Function
You can divide a message by adding an
index, or combine messages by erasing the
index.
While recording/playing back messages, you
can add an index (see below). In stop mode,
you can erase the index (see the next page).
Dividing a Message by
Adding an Index
You can add an index to a message during
recording or playback.
By dividing a message, you can easily find
the point you want to play back when you
make a long recording such as a meeting.
When you add an index, the message
numbers will increase as follows.
INDEX
Jog lever
ERASE
STOP
Message 1 Message 3 Message 2
Message 2 Message 3 Message 4
The first item on
the agenda is... We will now proceed
to the next subject.
Message 1
The message numbers increase.
An index is added.
ADD INDEX
RECORDI G N
S P
ADD INDEX
S P
FOLDER O1
An index is added.
Recording continues.
Message 1 Message 2 Message 3