Sony ICD-MS1 - Manual (Page 32)

32
Playing Back a Message at a
Desired Time with an Alarm
(Continued)
Notes
• If the alarm time comes while another message is
being played back with an alarm, the playback stops
and the new message will be played back.
• If the alarm time comes during recording, the alarm
will sound after the recording is finished. “,” will
flash when the alarm time comes.
• If more than one alarm time comes during
recording, only the first message will be played back.
• When the alarm time comes when the unit is in the
menu mode, alarm will sound and the menu mode
will be cancelled.
• If you erase the message you set the alarm for, the
alarm setting will be cancelled.
• If you add an index to the message you set the alarm
for, alarm setting remains on only the first part of
the divided message.
• If you erase the index on the message you set the
alarm for, the alarm setting will be cancelled.
• You can adjust the playback volume with the VOL
control.
• If the alarm time comes during erasing, the alarm
will sound after the erasing is finished.
• Alarm setting will not be cancelled when the alarm
playback finishes. To cancel alarm setting, see below.
To check the alarm setting
Follow steps 1 and 2 on page 30 after
selecting the alarm setting. The alarm date
and time will be displayed in the display
window.
To cancel the alarm setting or
change the alarm time
1 Select the message you set the alarm for,
and press MENU button.
2 Select “ALARM“ and press the jog lever.
3 To cancel the alarm setting: Press the jog
lever up or down to select “OFF” and press
the jog lever.
To change the alarm date and time: Press
the jog lever.
When the alarm date is displayed, follow
steps 3 to 5 on pages 30 and 31 to change
the alarm date and time.
4 Press MENU button.
Exit the menu mode.