Sony ICD-MS1 - Manual (Page 60)

60
On using a “Memory Stick“
• Do not touch or allow metallic objects to
come into contact with the metal parts of
the connecting section.
• Stick the label on the labeling position.
• Do not bend, drop or apply strong shock to
the "Memory Stick".
• Do not disassemble or modify the
"Memory Stick".
• Do not let the "Memory Stick" get wet.
• Do not use or keep the "Memory Stick" in
locations that are:
– Extremely hot such as in a car parked in
the sun
– Under direct sunlight
– Very humid or subject to corrosive gases
• When you carry or store a "Memory Stick",
put it in its case.
If you have any questions or problems
concerning your unit, please consult your
nearest Sony dealer.
Should a problem occur with the unit with
the “Memory Stick“ inserted, take it to your
nearest Sony dealer without removing the
“Memory Stick“. This will allow the problem
to be resolved more quickly.
Data backup
After the repair, recorded data sometimes
will be deleted. Back up important data
regularly to avoid losing the data.
Additional Information
Precautions
On power
Operate the unit only on 3 V DC. Use two
size AAA (LR03) alkaline batteries.
On safety
Do not operate the unit while driving, cycling
or operating any motorized vehicle.
On handling
• Do not leave the unit in a location near heat
sources, or in a place subject to direct
sunlight, excessive dust or mechanical
shock.
• Should any solid object or liquid fall into
the unit, remove the batteries and have the
unit checked by qualified personnel before
operating it any further.
On noise
• Noise may be heard when the unit is
placed near an AC power source, a
fluorescent lamp or a mobile phone during
recording or playback.
• Noise may be recorded when an object,
such as your finger, etc., rubs or scratches
the unit during recording.
On maintenance
To clean the exterior, use a soft cloth slightly
moistened in water. Do not use alcohol,
benzine or thinner.
Keep personal credit cards using magnetic
coding or spring-wound watches, etc., away
from the unit to prevent possible damage
from the magnet used in the speaker.