Sony DVP S9000ES - Manual (Page 46)

46
Using V
arious Functions with the Contr
ol Menu
P 0 1 T
P 0 1 T 0 3
P 0 2 T
x When playing a VIDEO CD or SACD/CD
Select the track you want to program.
4 To program other titles, chapters or tracks, repeat
Step 3.
The programmed titles, chapters or tracks are
displayed in the selected order.
5
Press H to start Program Play.
To stop Program Play
Press CLEAR.
To cancel programming
Press PROGRAM on the remote.
To change the program
1 In Step 2, select the program number of the title, chapter
or track you want to change using M/m.
2 Follow Step 3 for new programming.
To cancel the programmed order
To cancel all the titles, chapters or tracks in the
programmed order, select “ALL CLEAR” in Step 2.
To cancel the selected program, select the program using
M/m in Step 2 then press CLEAR, or select “– –” in Step 3
then press ENTER.
Total time of the
programmed tracks
Set: Quit: ENTER
Start: PLAY
PROGRAM
1. TRACK 0 2
ALL CLEAR
2. TRACK
3. TRACK – –
4. TRACK – –
5. TRACK – –
6. TRACK – –
7. TRACK – –
0:15:30
– –
01
02
03
04
05
T
DISPLAY
z The program remains even after Program Play ends
When you press H, you can play the same program again.
z You can do Repeat Play or Shuffle Play of the programmed
titles, chapters or tracks
During Program Play, press REPEAT or SHUFFLE on the remote.
Or set “REPEAT” or “SHUFFLE” to “ON” in the Control Menu
display.
z You can select “PROGRAM” directly
Press PROGRAM on the remote.
z You can select discs, titles, chapters and tracks for the
program by looking at the front panel display
You can program by looking at the front panel display instead of
using the programming display on the TV screen.
When you select Track 3 in a CD for program 1, the front panel
display will appear as follows:
Notes
• The number of titles, chapters or tracks displayed are the same
number of titles, chapters or tracks recorded on a disc.
• The program is canceled when:
– you open the disc tray
– the player enters standby mode by pressing ?/1 on the
remote
– you turn the power off by pressing POWER on the player
• Depending on the DVD, you may not be able to perform
Program Play.
• If you are using the PBC playback function, you must first stop
the disc before you can set a program.
• When playing SACDs, the track number appears as three
digits.
Program number
Track number
Creating Your Own Program (Program Play)