Sony DVP S9000ES - Manual (Page 75)

75
Additional Information
1 AUDIO OUT R (right)/L (left) 1/2 connectors (10, 12)
Connect to the audio input connector on your TV or
receiver (amplifier).
2 S-LINK/CONTROL S IN connector (10)
Connect to the S-link (Control S) connector on an
external component.
3 DIGITAL OUT OPTICAL connector (12, 15)
Connect to an audio component using an optical
digital connecting cord. Take off the cap.
4 DIGITAL OUT COAXIAL connector (12, 15)
Connect to an audio component using a coaxial digital
connecting cord.
5 VIDEO OUT 1/2 connectors (10)
Connect to the video input connector on your TV or
monitor.
6 S VIDEO OUT 1/2 connectors (10, 12, 15)
Connect to the S video input connector on your TV or
monitor.
Rear Panel
AUDIO OUT
2
R L
2
1
2 Y P B P R SCAN SELECT
SELECTABLE
INTERLACE
PROGRESSIVE
1
PCM/DTS/
DOLBY DIGITAL
CONTROL S IN
OPTICAL COAXIAL
DIGITAL OUT
COMPONENT VIDEO OUT
S VIDEO
OUT
VIDEO
OUT
S-LINK
1
7 COMPONENT VIDEO OUT (Y, P
B
, P
R
) connectors (11)
Connects to a monitor or projector having component
video input connectors (Y, P
B , P R ) that conform to
output signals from the player.
8 SCAN SELECT switch (62)
Select the component video signal format .
• SELECTABLE: changes the format according to the
setting made in “COMPONENT OUT” of the
“CUSTOM SETUP” display.
• INTERLACE: fixes to the format to interlace format.
• PROGRESSIVE: fixes to the format to progressive
format (480p).