Sony SVL24118FXB - Manual (Page 10)

10
Outputting a 3D image to a
3D-capable TV
You can output a 3D image to a 3D-capable
display (such as a 3D TV) by connecting the
display to your computer with an HDMI cable.
Refer to the manual that came with your 3D TV for
detailed information on the 3D function.
1
Connect an HDMI input port on a 3D TV to
the HDMI OUTPUT port on your computer
with an HDMI cable  (not supplied).

2
Change the input source of the TV to the
external input.
3
Press the Windows+P keys to change the
display output to only an external display.
4
Start the software that supports 3D photo
or video playback.
5
Play content.
Some software may require the resolution of the
external display to be changed. In this case, click
(Start), All Programs, VAIO Control Center,
Display, HDMI Resolution Settings, and select
1080(3D) or 720(3D).
To view D content after the settings, set the screen
resolution to 1080(2D) or 720(2D).
 The way to switch 3D images to D images differs
depending on the 3D TV you are using. Refer to
the manual that came with your 3D TV for
detailed information.
 The 3D button on your computer is not available
while 3D images are displayed on the 3D TV.
If images are not displayed in 3D
If images are not displayed in 3D on a 3D-
capable TV, follow these steps to display the
initial settings wizard for NVIDIA 3D Vision on
the TV screen and complete the initial settings.
1
Follow steps 1 to 3 in Outputting a 3D
image to a 3D-capable TV (page 10) to
output images from the computer to a 3D
TV.
2
Right-click on the desktop and select
NVIDIA Control Panel.
3
Click Set up stereoscopic 3D.
4
Click the right arrow in Test stereoscopic
3D and select Run Setup Wizard.
Follow the on-screen instructions to
complete the initial settings.
When connecting a 3D TV to your computer for the
first time, the prompt for the initial settings wizard of
NVIDIA 3D Vision will be displayed. Click Yes to
complete the initial settings wizard.
Viewing 3D images