Sony XM-D400P5 - Manual

Design and Specifications subject to change without notice.
2003 SONY MOBILE
PRODUCT GUIDE
Other Specifications
Audio Power Specifications
POWER OUTPUT AND TOTAL HARMONIC DISTORTION
200 watts minimum continuous average power into 4 ohms, 20 Hz to 300 Hz with no more than
0.2% total harmonic distortion per Car Audio Ad Hoc Committee Standards.
Circuit system Class D Technology
Pulse power supply
Inputs RCA pin jacks
High level input connector
Input level adjustment range 0.3 – 6.0 V (RCA pin jacks) 1.2 – 12.0 V (high level input)
Outputs Speaker terminals, Through out pin jacks
Suitable speaker impedance 2 – 8 W
Maximum outputs 400 W (at 4 W)
800 W (at 2 W)
Rated outputs (supply voltage at 14.4 V) 200 W (20 Hz - 300 Hz, 0.2% THD, at 4 W)
400 W (20 Hz - 300 Hz, 0.6% THD, at 2 W)
Frequency response 5 Hz – 300 Hz (+0.5 dB, -3 dB)
Harmonic distortion 0.06% or less (at 100 Hz, 4 W)
Low-pass filter 50 - 300 Hz, –12 dB/oct
Low Boost 0 - 10 dB (40 Hz)
Power requirements 12 V DC car battery (negative ground)
Power supply voltage 10.5 – 16 V
Current drain at rated output: 62 A (at 2 W)
Remote input: 2 mA
Dimensions Approx. 295 Ч 57 Ч 290 mm (11 5/8 Ч 2 1/4 Ч 11 1/2) (w/h/d)
not incl. projecting parts and controls
Mass Approx. 2.8 kg (6 lb. 3 oz.) not incl. accessories
Supplied accessories Mounting screws (5)
High level input cord (1)
Protection cap (1)
XM-D400P5
1 Channel Mono Amplifier
• 800W max power
• 200W x 1 RMS into 4W 20Hz - 300Hz @0.2% THD
• 400W x 1 RMS into 2W 20Hz - 300Hz @0.6% THD
• Class D
• Variable 50 - 300Hz 12dB/oct Low Pass Filter
• 40Hz EQ Boost
• RCA and Speaker Level Inputs