Apacer Technology PH150 User Manual
Apacer Technology Computer Accessories
High-Speed USB 2.0 Hub
PH150 User’s Manual
Introduction
Thank you for purchasing the Apacer Hi-Speed USB 2.0 hub. The hub
provides four downstream USB ports allowing you to add more USB
peripherals to your computer. The PH150 is 100% compliant with USB 2.0
specification and is backwards compatible with USB 1.1 as well. The PH150
can support all of your existing USB devices.
Featuring a rotatable USB port design design, PH150 allows users to
easily connect multiple high performance USB peripherals and large devices
such as high-resolution video cameras, scanners, printers, storage devices and
others.
Features
z
USB 2.0 High-Speed interface, supports transfer rates up to
480Mbps
z
Backwards compatible with USB 1.1 specification
z
Offers both bus-powered mode and self-powered mode
z
Automatic connection and speed detection
z
Over-current detection and protection
z
Two rotatable ports, easy to connect multiple devices and large
USB devices
z
Plug-and-play, support hot swapping of USB devices
System Requirements
z
Pentium processor or higher
z
USB Interface: one free USB port (USB 2.0-compliant host is
required for operating at high-speed mode)
z
O/S Support: Windows 98SE/ME/2000/XP, MAC OS 8.6 & above,
Linux kernel 2.4.0 & above (except MAC OS X, devices under all
other MAC O/S will only operate at 1.2 to 12Mbps)
Packing List
z
PH150, High-Speed USB 2.0 4-port hub
z
USB extension cable
z
User’s Manual
Installation Notice
z
Windows will detect PH150 and install the required driver
automatically, please don’t connect any USB device to the hub
before auto installation is complete
z
If PH150 is connected to a USB 1.1 host controller, the max. USB
1.1 bandwidth of 12 Mbps is shared across all four ports
z
The hub can be used without the optional power adapter with
most USB devices
Specification
USB interface
USB 2.0 High-Speed
Extended ports
4 downstream (two ports are rotatable)
Power source
Bus-powered mode
Self-powered mode (max. 500mA)
Compatibility
ACPI, OHCI and EHCI compliant
Operating system
Windows 98SE/ME/2K/XP
MAC OS 8.6 & above
Linux Kernel 2.4.0 & above
Certifications
CE, FCC, BSMI, RoHS